{"product_id":"vdl-monitor-ph-ec-climatron-pro-monitor-continuo-de-ph-ec-y-temperatura-del-agua-con-pantalla-lcd","title":"VDL Climatron Pro pH\/EC Monitor – Continuous Water pH, EC, and Temperature Monitor with LCD Display","description":"\u003ch2\u003eVDL Climatron Pro pH\/EC Monitor – Monitor Your Nutrient Solution 24\/7\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eVDL Climatron Pro pH\/EC Monitor\u003c\/strong\u003e is a continuous measurement device that monitors the \u003cstrong\u003epH\u003c\/strong\u003e, \u003cstrong\u003eelectrical conductivity (EC)\u003c\/strong\u003e, and \u003cstrong\u003ewater temperature\u003c\/strong\u003e of your irrigation reservoir in real time. It features a \u003cstrong\u003e1.7\" monochrome LCD screen (128 × 64 px) with white backlighting\u003c\/strong\u003e, allowing you to read all three parameters at a glance without having to remove the meter or take manual samples.\u003c\/p\u003e\n\u003cp\u003eIt comes as a complete kit, including the \u003cstrong\u003epH sensor\u003c\/strong\u003e, the \u003cstrong\u003eEC sensor\u003c\/strong\u003e, its power supply, and all mounting accessories, so you can install it permanently in the grow room and know the status of the nutrient solution at all times.\u003c\/p\u003e\n\n\u003ch3\u003eTwo Ways to Use It\u003c\/h3\u003e\n\u003ch4\u003e1. As a Standalone Monitor (No Climatron Pro Required)\u003c\/h4\u003e\n\u003cp\u003eThe monitor \u003cstrong\u003eoperates completely independently\u003c\/strong\u003e. It has its own screen and is powered by the \u003cstrong\u003eincluded 12 V \/ 0.5 A adapter\u003c\/strong\u003e, so it does not depend on any other equipment: simply connect it to the power supply, submerge the probes in the reservoir, and it will instantly start displaying the pH, EC, and water temperature. It is the ideal option if you only want to monitor your tank without setting up a complete control system.\u003c\/p\u003e\n\u003ch4\u003e2. As an Integrated Module in the Climatron Pro Controller\u003c\/h4\u003e\n\u003cp\u003eIf you already use the \u003cstrong\u003eVDL Climatron Pro controller\u003c\/strong\u003e, this monitor can be \u003cstrong\u003eintegrated as another module in the system\u003c\/strong\u003e. Simply connect it using the included RJ12 cable (a 1 m and a 5 m cable are available, as well as a splitter), and the Climatron Pro will \u003cstrong\u003edisplay the pH and EC values directly on its 5\" screen\u003c\/strong\u003e, alongside the rest of the room's parameters. This allows you to centralize all cultivation information on a single device.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSize\u003c\/strong\u003e: 145.3 × 33.4 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtection rating\u003c\/strong\u003e: IP20\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOperating temperature\u003c\/strong\u003e: 0–50 °C\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower supply\u003c\/strong\u003e: DC 12–24 V\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower consumption\u003c\/strong\u003e: ≤ 40 mA at 24 V\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEC range\u003c\/strong\u003e: 0–5 mS\/cm · accuracy ±5% of reading\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003epH range\u003c\/strong\u003e: 0–14 · accuracy ±0.1\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater temperature\u003c\/strong\u003e: 0–50 °C · accuracy ±1 °C\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCommunication\u003c\/strong\u003e: RJ12 6P6C with 24 V DC power supply · RS485 slave · 9600 bps · 8N1\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: 1.7\" monochrome LCD, 128 × 64 px, with white backlighting\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003epH sensor\u003c\/li\u003e\n\n\u003cli\u003eEC sensor\u003c\/li\u003e\n\n\u003cli\u003e12 V \/ 0.5 A power adapter\u003c\/li\u003e\n\n\u003cli\u003eExpansion screws\u003c\/li\u003e\n\n\u003cli\u003eMounting plates\u003c\/li\u003e\n\n\u003cli\u003eSelf-tapping screws\u003c\/li\u003e\n\n\u003cli\u003eSplitter\u003c\/li\u003e\n\n\u003cli\u003e1 m RJ12 cable\u003c\/li\u003e\n\n\u003cli\u003e5 m RJ12 cable\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eReplacement Parts Available\u003c\/h3\u003e\n\u003cp\u003eThe probes are consumables and degrade with use, so you can replace them without changing the monitor. The \u003cstrong\u003ereplacement pH probe\u003c\/strong\u003e (ref. 600494) and the \u003cstrong\u003ereplacement EC electrode\u003c\/strong\u003e (ref. 600495) are available, both compatible with this device. Replacing the probe when the calibration begins to drift is the most cost-effective way to maintain accurate readings for years.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Measure pH and EC Continuously?\u003c\/h3\u003e\n\u003cp\u003epH determines which nutrients the plant can absorb, while EC indicates the salt concentration of the solution. Both values change naturally throughout the day due to the plant's uptake, evaporation, and the reservoir's temperature. A handheld meter only gives you a snapshot; the \u003cstrong\u003eClimatron Pro pH\/EC Monitor\u003c\/strong\u003e shows you the actual trend, allowing you to make corrections before nutrient lockout or salt buildup occurs.\u003c\/p\u003e","brand":"VDL","offers":[{"title":"Default Title","offer_id":48138407051429,"sku":"MEDVDL000101","price":494.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/1792\/6309\/files\/vdl-monitor-ph-ec-climatron-pro.png?v=1787327272","url":"https:\/\/www.growindustry.es\/en\/products\/vdl-monitor-ph-ec-climatron-pro-monitor-continuo-de-ph-ec-y-temperatura-del-agua-con-pantalla-lcd","provider":"Grow Industry","version":"1.0","type":"link"}