Creating a marijuana culture space may seem like a challenge, but with adequate knowledge and equipment, it is a relatively simple process. Of course, to obtain quality results, it is essential to take care of every detail, from the Initial cleaning of the cultivation area until the control of temperature and humidity. In this guide, from Grow Industry we bring you all the necessary steps and recommendations to prepare your cultivation room efficiently and professionally.
Steps to keep an interior in your room
-
Cleaning and disinfection procedures for your cultivation space
Importance of initial cleaning: Before starting, it is essential to prepare the space by eliminating any dirt or residue that can house pests or pathogens. Performing deep cleaning not only protects plants, but also Create a safe environment for healthy growth of your crops.
Complete disinfection: Use specialized products such as At Clean It is ideal to ensure that the area is free of harmful microorganisms. These products eliminate residues from salts and remains of previous crops, guaranteeing that your plants have the best possible start.
-
First decisions: lighting and ventilation in your cultivation space
Lighting system planning: The quantity and type of light depends on the size of the space and the needs of your plants. Choosing correct lighting is crucial for foster vigorous growth and a balanced development of the plant.
Importance of adequate ventilation: A constant air flow helps avoid moisture and overheating problems, which can damage your plants or attract pests. Maintain a fresh and moving air ensures a healthy environment and improves the absorption of CO2.
When planning the lighting system, it is essential to choose the adequate light type (LED, HPS, CMH or CFL) according to the needs of the crop and the characteristics of the space. The amount of light must adapt to the size of the cultivation area; For example, 200-400 LED watts are usually recommended or 400-600 HPS watts for a space of 1 square meter. In addition, adjusting the light spectrum for each growth phase is key:
- Vegetative phase: Requires cold (blue) light to strengthen the growth of stems and leaves.
- Flowering phase: It needs warm (red) light that favors the development of buds.
Plan these aspects well ensures that plants receive The necessary energy in each phase, optimizing its development and production.
-
Optimizing light in your culture space with reflective paper
Maximize light efficiency: Place reflective paper on the walls of your cultivation space allows light to be distributed uniformly. This ensures that every corner of space receives enough light, thus optimizing the development of all plants.
Types of reflective materials: Among the most recommended materials is the Reflective plastic diamond/black, which offers a high capacity for reflection and is durable. This material maximizes the efficiency of light without overheating the space.
-
Configuration of the extraction and intraction system: tips and best practices
Importance of air control: A good extraction and intraction of air is essential to avoid accumulations of heat and humidity. Configure an efficient system It is key to maintaining the ideal environment and avoiding condensation problems.
Calculation of the necessary air flow: When choosing the size of extractors and intractors, it is important to consider the volume of space and heat generated by the lights. A proper air flow helps maintain Stable temperature conditions and avoid hot points.
-
Extraction system for your cultivation room: tips and recommendations
Adequate extractor choice: Selecting the most appropriate extractor will depend on the size of the space and the lighting equipment used. Invest in a powerful extractor It ensures a constant air flow and avoids the accumulation of heat and humidity.
System configuration: Installing the extractor in the correct place is essential to maximize its efficiency. Place it at the highest point helps expel accumulated hot air and to maintain an optimal temperature in the crop.
-
Smell filter installation: tips and recommendations
Odor control: An activated carbon filter is indispensable for those looking for discretion. This device neutralize odors Before the air leaves the culture area, helping to maintain an environment without unwanted aromas.
How to install it correctly: Integrating the filter into the extraction system is simple, but it must be done correctly to guarantee its effectiveness. Place the filter at the extractor entrance ensures that All the air passes through the filter Before being expelled.
-
Connection through the aluminum flexible tube: tips and recommendations
Installation of ventilation tubes: Connect all the elements of the ventilation system with an aluminum flexible tube allows A simple and leak -free installation. Be sure to seal each union well to avoid the loss of air.
Efficient use of 10 meter aluminum tubes: If the cultivation space is large, having enough flexible tube facilitates the assembly of the entire system without restrictions. Distribute the tube ensures that the air circulates correctly.
-
Cultivation room lighting kits
Types of lighting kits: The available lighting kits include LED, HPS and CMH, each with specific characteristics for different types of crop. Selecting adequate depends on factors such as energy efficiency and light intensity that each culture phase needs.
Assembly and configuration: Install and adjust the lighting kits correctly guarantees that your plants receive the necessary light at each growth stage. A proper assembly improves light penetration and optimizes the development of the plant.
-
Cultivation room ventilation
Use of additional fans: The strategic placement of additional fans allows air to be distributed homogeneously, avoiding areas with areas High humidity or hot points They can harm the culture.
Air flow distribution: Make sure the air flow reaches every corner, which prevents stagnation and reduces the risk of diseases. Good air circulation Strengthens plants and improves the quality of the buds.
-
Use of the timer table
Light and ventilation system automation: Use timer tables simplifies the control of light and ventilation schedules, allowing you to keep the growth cycle constantly without manual intervention.
Schedules configuration: It is advisable to schedule the timer tables according to the needs of each growth stage, facilitating A stable routine for plants and guaranteeing that they receive light and air at optimal times.
-
Climatron: Comprehensive weather control
Climatron functions: A climate allows simultaneous control of temperature, humidity and CO2, all in a single device. This tool facilitates control of climatic conditions in the culture space, optimizing the development of plants.
Efficient installation and use: Place the weather in a central area of the crop ensures that the sensors capture the conditions of the environment. Adjust your parameters It helps you maintain the ideal conditions in each phase of growth.
-
Thermohigometer in the cultivation room
Temperature and humidity measurement: A thermohigometer is indispensable to monitor the atmosphere of your cultivation. With him, you can quickly detect variations in temperature and humidity and adjust other equipment accordingly.
How to interpret thermohigometer data: When reading the thermohigometer values, you can make changes in ventilation or humidification as necessary, ensuring that the plants remain in a stable environment.
-
Efficient use of the humidifier in your cultivation room
Moisture control: An 8 -liter humidifier is useful to keep moisture at adequate levels, especially in dry climates. Moisture is key to the development of plants and helps avoid problems in early growth stages.
When and how to use it: Adjust the humidifier according to the growth phase ensures that the plants receive The ideal humidity at each stage. In the flowering stage, for example, maintaining the lower humidity reduces the risk of mold.
-
Efficient preparation of your cultivation room
Review and adjust: Before starting the crop, it is advisable to verify that all systems work properly. Try each equipment and adjust It helps identify problems before starting the growth cycle.
Final Checklist: Review the key aspects, such as lighting, ventilation and temperature control, ensures that everything is ready to receive plants. A good initial preparation You can make a difference in the final results of your cultivation.
Buy everything you need to set up an interior in your room at Grow Industry
In Grow Industry, you will find all the necessary equipment and tools to assemble your interior culture space professionally. From LED lighting and complete kits to weather control products, we are here to help you build the ideal environment for your plants. Explore our store and equip your cultivation space with products from High quality and specialized advice.
Mounting an interior cultivation space requires planning and attention to details, but with the proper equipment and good control of Temperature, lighting and ventilation, your plants will have everything necessary to grow and bloom. In Grow Industry, we are proud to offer you quality solutions and products for the success of your cultivation. Visit us and find everything you need to start!