Neptune Hydroponics Co2 Controller

Features of the Neptune Probe Co2 Controller

The Neptune Co2 controller with probe comes with a digital display that indicates the amount of carbon dioxide you have at all times. The precision of the controller is 40 ppm and its consumption is just 1.8W. It can operate at a temperature between 10 and 50 degrees Celsius. The Neptune probe cable measures 3.1 meters , the output cable to the CO2 valve measures 1 meter and the plug cable 60 centimeters.

How to use the Co2 controller with Neptune probe?

The Co2 controller is very easy to use. By clicking on Switch, you can choose between H and L. Option H is the maximum value you want for Co2 in the crop and option L is the lowest value. With the small buttons you can raise and lower these values. When the crop reaches the maximum CO2 level, its input is cut off. And when you reach the minimum level, the device will turn on again. If you leave the Switch button pressed for 10 seconds, you access an internal menu to choose the option of plugging in a generator or extractors . To use CO2 well in plants, it must be increased little by little during the flowering phase. That is why you absolutely need this Co2 controller with Neptune probe.

Why measure Co2 with the Neptune Probe Controller?

The Co2 controller with Neptune probe will allow you to measure and control the amount of CO2 in the crop . The built-in probe is responsible for measuring the concentration of this gas. Depending on what the controller dials, it will open or close the bottle's electro valve or turn on the CO2 generator. The adequate amount of CO2 will make your plants finish the flowering phase sooner and much more productively. But this gas not only accelerates the process, but will also increase the weight of the fruits as the plant creates more cell walls.