AutoPot irrigation system

Features of the AutPot Automatic Watering System

The AutoPot automatic irrigation system consists of a valve irrigation system . A system that always remains in operation thanks to its 45 liter tank. This tank is where you can mix the fertilizers to water all the pots. A hose comes out of this tank so you can place all the branches you want. The water will flow from the central tube to spread through the arms and reach the pots. At the end of the central tube there is a tap that will act as a drain to empty the irrigation circuit. The system includes 4 pots of 15 liters each.

How does the AutPot irrigation system work?

AutoPot is an individual automatic irrigation system , since it will only water those plants that are dry and unwatered. A system of pots that are placed on top of a valve and with which you can control and provide nutrients for up to 4 plants. Once the pot gets wet, the valve is closed to prevent water from entering. When the plant drinks the water or dries up, open the valve again until the pot gets wet again. However, excessive watering during the first days can cause dwarfing in the plants. That is why it is recommended to water manually for at least the first two weeks. It is best to fill the 4 pots with a mixture of soil and clay in equal parts. This way you will get better aeration and greater absorption capacity to prevent puddles from forming. It is also recommended to place only a minimum of 2.5 centimeters of clay in the base to avoid excess moisture in the soil.

Reviews of AutoPot automatic watering system

The opinions of the AutoPot automatic irrigation system assure that it is a very practical system. In fact, it eliminates one of the problems of drip irrigation (waterlogging the plants) and makes this task much more optimal and productive. Not in vain, it is a system with which the substrate will always have a minimum of water.