Blauberg "T" union

When to use a T union for your pipes?

There are different reasons that lead us to use a T joint between tubes. The first is when it is necessary to minimize the noise that the air makes when coming out while using a powerful extractor fan. By dividing the path taken by the air, its speed and, therefore, the noise are reduced. On the other hand, it can also be used when we need to achieve better air distribution for the crop, since by dividing the air circulating in the tube into 2, a more uniform distribution is achieved than without using the T.

How does a T-piece for joining ventilation pipes work?

As its name indicates, the T piece is shaped like a T, that is, it is a 3-inlet piece. For this to work you must attach a tube to each of the inputs . You only need to locate in which section of the installation you will place it and install it by screwing it with the corresponding section. You must make sure that it is properly installed to prevent air from escaping.

In what mouth sizes can you buy a T-piece for vent connections?

Because the T union is used to mate with other tubes in the ventilation system, you can find different mouth sizes to fit the size of each tube. These are the existing sizes :

• 100mm.
• 125mm.
• 150mm.
• 200mm.
• 250mm.
• 315mm.