Aqua Control High-Pressure Misting Pump 50 bar with 6 Nozzles

Frequently asked questions

• What is dry fog and what is it for?

  This pump turns water into droplets so fine that they evaporate before touching the floor or the leaves. That evaporation absorbs heat from the air, so it drops the ambient temperature by several degrees and raises relative humidity without wetting anything.

• Does it wet the plants or the substrate?

  No. Working at up to 50 bar of pressure, it produces true dry fog, with droplets that evaporate in the air. It raises relative humidity without wetting the plants or the substrate, which is key to avoiding fungus.

• What does the kit include?

  It comes as a complete kit ready to install: remote control, 10 metres of polyamide tubing, 2 metres of polyester, filter, 6 nozzles of 0.1 mm, cutter and 12 clamps. You do not need to buy anything else for the basic installation.

• Where is it normally used?

  It is ideal in greenhouses and on terraces, where heat builds up fast and humidity drops. By lowering the ambient temperature through evaporation, it helps your plants get through the hottest hours of the day.

• Is it noisy when running?

  It is a quiet unit, with a noise level of 52 dB. It has a 2-piston assembly and a 24 V DC motor, with an output of 60 W and a flow rate of 0.25 l/min.

• How is it powered and controlled?

  It plugs into the 220-240 V mains at 50/60 Hz and is operated with the remote control included, so you can switch it on without going over to the unit. The whole assembly weighs around 4.2 kg.