Aquamaster 40 mm Mounting Ring – Probe Adaptor for PVC Pipe
Aquamaster 40 mm Mounting Ring – Probe Adaptor for PVC Pipe
-
Type: Probe mounting adapter ring
-
Material: PVC
-
Pipe: 40 mm diameter
-
Threads: 3/4" with Ø 19.05 mm or 1/2" with Ø 12.7 mm
-
Use: Installations with C800 Pro Inline or W650 Pro
-
Weight: Estimated 0.2 kg (the supplier states 200 kg due to a typo)
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- ⚙️ In-line probe: Allows the probe to be mounted inside the pipe.
- 💧 40 mm PVC: Guaranteed sealing at the pressurized point.
- 🧪 Two thread sizes: 3/4" with Ø 19.05 mm or 1/2" with Ø 12.7 mm.
- 📊 Reliable reading: Places the probe in the main flow.
Check your probe's thread before ordering: there is no adapter between 3/4" and 1/2".
Full description
PVC mounting ring for 40 mm pipe. This fitting allows a measuring probe to be installed inside the pipe of the irrigation circuit in systems with an inline controller or monitor such as the C800 Pro Inline or the W650 Pro.
It serves a dual purpose: it secures the probe in the correct position within the flow and ensures a watertight seal. An improperly installed probe provides erratic readings because it is not fully immersed in the main flow, or it may cause a leak at a pressurized point in the circuit.
Choose the thread size for your probe
The outside dimension is the same for both versions (40 mm pipe); the difference is the internal thread diameter:
3/4" thread with a Ø 19.05 mm pitch, and 1/2" thread with a Ø 12.7 mm pitch. Check your probe's thread before ordering: they are incompatible with each other, and there is no intermediate adapter.
Weight note: our supplier lists 200 kg for this item, which is clearly a confusion between grams and kilograms. The actual weight is approximately 0.2 kg, which is the estimated weight we have entered.
No product image: the supplier does not publish a photograph of this part.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Check the threads on your probe before ordering the ring.
2. Shut off the flow and bleed the pressure from the pipe section.
3. Drill into the 40 mm pipe at the chosen location, in an area of continuous flow.
4. Install the ring and tighten until firm, without forcing the PVC.
5. Thread the probe and check that the sensor is positioned within the flow.
6. Re-pressurize and verify that there are no leaks at the joint.

Aquamaster 40 mm Mounting Ring – Probe Adaptor for PVC Pipe
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Envío gratis antes
Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
It is a PVC ring for 40 mm pipe that lets you install a measuring probe inside the irrigation circuit pipework. It is intended for systems with an inline controller or monitor such as the C800 Pro Inline or the W650 Pro.
-
It has a double job: it holds the probe in the right position within the flow and keeps the passage watertight. A badly installed probe gives erratic readings because it is not bathed by the main flow, or else it causes a leak at a pressurised point.
-
Choose by the thread on your probe. The outer size is the same in both versions (40 mm pipe); what changes is the inner thread: 3/4 inch with a 19.05 mm pitch or 1/2 inch with a 12.7 mm pitch.
-
No, they are incompatible with each other and there is no intermediate adapter. That is why it is essential to check the thread on your probe before ordering.
-
About 0.2 kg, which is the weight we have entered as an estimate. Our supplier states 200 kg for this reference, an obvious mix-up of grams with kilos.
-
The supplier does not publish a photograph of this part, which is why no image appears. In any case you have easy returns within 30 days and customer service Monday to Friday, 10:00 to 19:00, to confirm compatibility before you buy.