Go directly to product information
1 of 3

Aquamaster Peristaltic Dosing Pump C10, C20 and C30 – pH and Nutrient Dosing

Aquamaster Peristaltic Dosing Pump C10, C20 and C30 – pH and Nutrient Dosing

Regular price 188,93 €
Black Friday price 160,95 € Reference price 188,93 €−14 %
Out of stock
Black Friday price available on 27/11 · Get early access with Pro Club or by joining the early access list
Pay in one tap with Bizum — no extra fees.
Is this product for you?
  • Type: Peristaltic dosing pump

  • C10: 1 pump, 5.4 l/h, 6 W, suitable for pH or nutrients

  • C20 and C30: 2 and 3 pumps, 1.5 ml/s each, NOT suitable for pH

  • Connection: UTP cable to the C800 Pro controller

  • Maintenance: The tube is replaced, not the pump

  • Availability: C10 and C20 available on request

Model: C10 - 1 pump (pH or nutrients)
Quantity

Description

  • 🔌 Only the C10 is suitable for pH: The C20 and C30 are for nutrients only.
  • ⚙️ Peristaltic: The liquid only touches the tube, never the motor.
  • 💧 Flow rates: 5.4 l/h on the C10 and 1.5 ml/s per pump on the C20 and C30.
  • 🧪 For the C800 Pro: UTP cable connection to the controller.

To control pH and EC at the same time, you need a C10 plus a C20 or C30.
Full description

Aquamaster's peristaltic pumps carry out the commands of the C800 Pro controller: they inject the exact amount of pH corrector or concentrated fertilizer into the reservoir. They connect to the controller via UTP cable.

The peristaltic principle has a specific advantage with aggressive products: the liquid only touches the tube, never the motor or an impeller. This allows for dosing concentrated acids and bases for years, and when the tube wears out, you replace the tube, not the pump.

🔴 Critical difference before choosing

C10 — 1 pump: doses pH or nutrients. Flow rate of 5.4 l/h and 6 W power consumption. It is the only one of the three suitable for pH correction.

C20 — 2 pumps and C30 — 3 pumps: 1.5 ml/s per pump. They are only suitable for nutrients and EC control. They are NOT suitable for pH. This is a limitation of the equipment itself, not a recommendation: if you use them with concentrated acid or base, you will not get the control you are looking for.

That is why, if you want to control pH and EC at the same time, the correct combination is a C10 for pH plus a C20 or C30 for fertilizers. A C30 alone does not give you pH control, no matter how many pumps it has. It is the most common purchasing mistake in this range, and we prefer to warn you.

No product image: our supplier does not publish a photograph of these pumps. The C10 and C20 are supplied on request.

Warranty

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

How to use

1. Check that you have chosen the C10 if you need to correct the pH.
2. Mount the pump above the level of the tank, in a dry area.
3. Connect the suction to the product container and the outlet to the injection point.
4. Connect the pump to the C800 Pro controller with the UTP cable.
5. Calibrate the actual flow rate by measuring the volume dosed in one minute.
6. Check the peristaltic tubing every 3 months and replace it when signs of wear appear.

See details

Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.

Increasing discounts

Save an extra -3% to -12%

Envío gratis antes

Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)

Fast deliveries

With free, discreet shipping

Extended warranty

Up to 3 years

I want to be PRO

Frequently asked questions