Aquamaster Substrate Meter S300 Pro3 and E300 Pro2 – Direct pH and EC Readings in the Substrate
Aquamaster Substrate Meter S300 Pro3 and E300 Pro2 – Direct pH and EC Readings in the Substrate
-
S300 Pro3: pH 0-14 with ±0.1 and temperature 0-50 °C with ±0.5 °C
-
E300 Pro2: EC 0-19990 µS with ±2 % of full scale
-
Electrodes: For soft and wet substrate, the reinforced EC one
-
Relationship: Complementary, each measures a different parameter
-
Replacement: Not available for this range at our distributor
-
E300 Pro2 Weight: 171 g (the supplier states 0.02 kg due to a typo)
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 📊 Direct reading: It is inserted into the substrate, without preparing extracts.
- 🧪 Two models: S300 Pro3 measures pH and E300 Pro2 measures EC.
- 🪴 Before symptoms appear: It detects accumulated salts and pH drifts.
- 🔄 No replacement: There is no replacement electrode available for the Pro2 and Pro3 range.
Measure what is in front of the root, not what has already come out through the drainage.
Full description
Aquamaster substrate meters read directly in the growing medium, without the need to prepare an extract or squeeze the root ball. Simply insert the electrode into the moist substrate and wait for the reading.
This is a major difference compared to measuring the drainage: the drainage tells you what has come out, not what the roots have in front of them. With a substrate meter, you can detect the accumulation of salts in the pot and pH fluctuations in the root zone before the plant shows symptoms.
Which model do you need
S300 Pro3: measures pH and temperature. pH range 0-14 with an accuracy of ±0.1 and temperature from 0 to 50 °C with ±0.5 °C. It weighs 158 g and its electrode is designed for soft, moist substrate.
E300 Pro2: measures EC and temperature. Range from 0 to 19990 µS with an accuracy of ±2% of the full scale. Its EC electrode is especially resistant, which matters when you insert it daily into substrate with perlite or expanded clay.
They are complementary, not alternatives: one gives pH and the other EC. If you need to control both parameters in the substrate, you need both devices.
Important notice about replacement parts
The data sheets for both models indicate that they have a replaceable electrode. However, our distributor does not sell any replacement electrodes for the Pro2 and Pro3 range. The seven Aquamaster replacement electrodes we sell are all from the previous range (classic Pro and Pro 2).
We are telling you this before you buy: if the electrode wears out or breaks, as of today we cannot offer you the replacement and the entire device would have to be replaced. If a guaranteed replacement is essential for you, check the S300 Pro 2 from the previous range, which does have its electrode available.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Calibrate the device with the standard solutions before first use.
2. Water or check that the substrate is moist: it will not give a reliable reading when dry.
3. Insert the electrode into the root zone, halfway down the root ball.
4. Wait for the reading to stabilize before recording it.
5. Repeat at two or three points in the pot and take the average value.
6. Rinse the electrode with distilled water and store it as instructed in the manual.

Aquamaster Substrate Meter S300 Pro3 and E300 Pro2 – Direct pH and EC Readings in the Substrate
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Envío gratis antes
Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
The run-off tells you what has come out of the pot, not what the roots actually face. By measuring in the substrate itself you spot salt build-up and pH drift in the root zone before the plant shows any symptoms.
-
No need. You simply push the electrode into the moist substrate and wait for the reading to settle. It is a quick process that you can repeat daily with no fuss.
-
The S300 Pro3 measures pH and temperature, while the E300 Pro2 measures EC and temperature. They are not alternatives but complements: if you want to control both parameters in the substrate, you need both devices.
-
The S300 Pro3 covers pH from 0 to 14 with an accuracy of ±0.1 and temperature from 0 to 50 °C with ±0.5 °C, and it weighs 158 grams. The E300 Pro2 measures from 0 to 19990 µS with an accuracy of ±2 % of full scale.
-
They are built for it. The S300 Pro3 electrode is designed for soft, moist substrate, and the E300 Pro2 one is particularly tough, which you appreciate when you push it every day into mixes with perlite or expanded clay.
-
We would rather be honest with you before you buy: although the data sheets state that the electrode is replaceable, our distributor does not sell spares for the Pro2 and Pro3 range. The Aquamaster spare electrodes we stock belong to the previous range, so if a guaranteed spare is decisive for you, take a look at the S300 Pro 2.