Aquamaster Single-Use Calibration Solution – Box of 25 x 20 ml Sachets, pH 4.01 and 7.00
Aquamaster Single-Use Calibration Solution – Box of 25 x 20 ml Sachets, pH 4.01 and 7.00
-
Type: pH calibration standard solution
-
Format: Box of 25 x 20 ml sachets
-
Values: pH 4.01 and pH 7.00
-
Traceability: NIST
-
Storage: Between 15 and 25 °C, do not reuse
-
Unavailable: No EC 1413 single-dose sachet available
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🧪 20 ml single-dose: Box of 25 sachets, one per calibration.
- 📊 Intact standard: No CO2 from the air or electrode contamination.
- 🔄 NIST traceability: Available at pH 4.01 and pH 7.00.
- ⚙️ No EC sachet: For EC 1413, you must use the bottle.
An open bottle lies: the single-dose sachet guarantees that you calibrate correctly.
Full description
Aquamaster calibration standard solution in 20 ml single-dose sachets, in a box of 25 units. Available in pH 4.01 and pH 7.00, with NIST traceability.
Why a sachet instead of a bottle
Because the standard solution degrades as soon as it is opened. When you open a 100 ml bottle, CO2 from the air enters, which gradually acidifies the pH 7.00 solution, and every time you dip an electrode into the bottle, you contaminate it with residues from the previous measurement. The result is that you calibrate with a standard that no longer matches what the label says, and from that point on, all your readings are offset without you knowing it.
The single-dose sachet solves this problem at its root: you open it, use it once, and throw it away. Every calibration starts with an intact solution. It is the correct way to calibrate if your nutrition decisions depend on the reading.
They are also very practical outside the warehouse: they fit in a pocket and there is no risk of spills in the growing room.
Points to bear in mind
There is no EC 1413 single-dose sachet in our supplier's catalog; only pH 4.01 and pH 7.00 are available. To calibrate conductivity, you will have to use the EC 1413 solution in a bottle.
Barcode: the supplier publishes two different EANs in the same field for each reference, so we do not upload either until we clarify it with them. It does not affect the product.
Store between 15 and 25 °C. Do not reuse the contents of an already opened sachet.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Rinse the electrode with distilled water and dry it without rubbing the bulb.
2. Open a pH 7.00 packet and pour the contents into a clean glass.
3. Immerse the electrode and wait for the meter to confirm the point.
4. Rinse again and repeat the process with a pH 4.01 packet.
5. Discard the contents of the used packets; do not store them.
6. Repeat the calibration every 2 to 4 weeks, depending on how often the meter is used.

Aquamaster Single-Use Calibration Solution – Box of 25 x 20 ml Sachets, pH 4.01 and 7.00
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Envío gratis antes
Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
Because the reference solution degrades as soon as it is opened. The sachet is opened, used once and thrown away, so every calibration starts from an intact solution: that is the correct way to calibrate if your nutrient decisions depend on the reading.
-
When you uncap it, CO2 from the air gets in and gradually acidifies the pH 7.00 solution, and every time you dip an electrode into the bottle you contaminate it with residue from the previous measurement. The result is that you calibrate with a reference that no longer matches its label, and all your readings are shifted without you realising.
-
It is a box of 25 single-use 20 ml sachets, available in pH 4.01 and pH 7.00, with NIST traceability. Those are the two values you need for the standard calibration of a pH meter.
-
No, our supplier's catalogue only offers pH 4.01 and pH 7.00 in single-use format. To calibrate conductivity you will need to use the EC 1413 solution in a bottle.
-
Very much so: they fit in a pocket and there is no risk of spillage in the grow room. That is why they are the preferred option for anyone calibrating right beside the plants.
-
Keep them between 15 and 25 °C and do not reuse the contents of a sachet once opened. Each single dose is intended for one calibration, and that is precisely where its advantage lies.