Cli-Mate Climate Controller with Hysteresis

Cli-Mate Climate Controller with Hysteresis

The Cli-Mate Climate Controller with Hysteresis automatically regulates the ventilation of the grow space based on the ambient temperature, through a continuous and progressive adjustment of the airflow that prevents sudden speed jumps. Its configurable hysteresis system with a band of up to 7 ºC maintains stable microclimates throughout the entire growth cycle, with two independent inputs to connect exhaust fans on both sides of the equipment. Available in three power ratings, it adapts to rooms of any size that need progressive and quiet climate control.

Benefits

• Progressive and proportional ventilation. Adjusts the airflow continuously according to the temperature, without sudden switching on or off.
• Configurable hysteresis. A band of up to 7 ºC prevents motor wear from constant switching.
• Two-zone airflow control. Its two inputs allow the coordination of exhaust and intake fans to maintain negative pressure.
• Quick installation. Includes a rear mounting plate and simple button configuration.
• Available in three power ratings. 7A, 12A, and 16A to adapt to the size of each grow room.

Key Features

• Progressive and proportional ventilation control with hysteresis adjustment.
• Independent minimum and maximum speed potentiometers.
• Internal temperature sensor with a switching differential of 1 ºC per step.
• Two independent inputs to connect fans or exhaust fans.
• Button configuration and rear mounting plate included.
• Available in three power ratings: 7A, 12A, and 16A.

Technical Specifications

• Power supply: 220-230V / 50Hz
• Maximum current: 7A / 12A / 16A depending on the version
• Temperature range: 5-55 ºC
• Hysteresis: adjustable band up to 7 ºC, switching differential of 1 ºC per step
• Protection: IP44
• Dimensions: 150 x 230 x 85 mm
• Weight: 2 kg
• Includes: temperature probe and mounting plate

How to Use

• Mounting. Fix the controller to the wall using the included mounting plate.
• Connection. Connect the exhaust fans to the available inputs and place the temperature probe.
• Speed adjustment. Set the minimum and maximum speed using the potentiometers.
• Hysteresis adjustment. Define the desired temperature band and switching differential.
• Validation. Check that the ventilation adjusts progressively to temperature changes.
• Maintenance. Periodically check the probe and connections for stable operation.

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

1. Install the controller in an accessible area near your growing space using the rear mounting plate.
2. Connect the fan(s) or extractor fan(s) to the available inputs on both sides of the unit.
3. Plug the controller into the mains (220-230V).
4. Use the potentiometers to set the desired minimum and maximum fan speeds.
5. Use the buttons to set your preferred target temperature and hysteresis (differential) range, with a bandwidth of up to 7ºC.
6. The unit will automatically adjust the fan speed based on the temperature detected by the internal sensor.
7. Periodically check the operation and readjust the settings if your growing conditions change.