Cli-Mate Twin Controller-Humi Controller - Temperature and Humidity Control

Cli-Mate Twin Controller-Humi Controller - Temperature and Humidity Control

The Twin Controller-Humi from Cli-Mate is a dual controller that combines climate control with hysteresis and humidity control in a single unit, independently managing air extraction and supply along with the activation of humidifiers or dehumidifiers. Its dual timer also allows you to coordinate lighting and heating, adapting the growing environment to each phase of the cycle. Available in two power ratings, it is the solution for rooms that need to control temperature and humidity without resorting to several independent units.

Benefits

• Combined climate and humidity control. A single unit manages temperature, humidity, lighting, and heating.
• Ventilation with hysteresis. Prevents constant switching on and off of the extractors thanks to the switching differential.
• Integrated hygrostat. Activates a humidifier or dehumidifier according to the setpoint.
• 5-meter sensor. Allows you to place the probe exactly where the most representative reading is needed.
• Available in two power ratings. 8A and 24A to adapt to different crop sizes.

Key Features

• Dual timer to manage lighting and heating.
• Climate control with hysteresis to regulate ventilation progressively.
• Humidity control via hygrostat for humidifier or dehumidifier.
• Temperature and humidity sensor with 5 meters of cable.
• Easy calibration using front buttons.
• Available in two power ratings: 8A and 24A.

Technical Specifications

• Power supply: 220-240V
• Maximum current: 8A / 24A depending on the version
• Temperature range: 5-55 ºC
• Humidity range: 20-100% RH
• Protection: IP44
• Weight: 2.1 kg
• Includes: 5 m probe and rear mounting panel

How to Use

• Mounting. Fix the unit to the wall using the included rear mounting panel.
• Connection. Connect extractors, humidifier/dehumidifier, and lighting as appropriate.
• Probe placement. Place the 5-meter sensor at the point to be monitored.
• Configuration. Adjust temperature, humidity, and the timer using the front buttons.
• Validation. Check that each output responds correctly to the configured parameters.
• Maintenance. Periodically check probes and connections for stable operation.

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

1. Install the rear mounting panel in the desired location within the grow room.
2. Connect the intake and exhaust air fans to the Twin Controller-Humi.
3. Place the dual temperature and humidity sensor in a representative location within the room.
4. Use the front buttons to set the desired temperature and humidity ranges.
5. Calibrate the minimum intake and exhaust speeds and the negative pressure according to the crop's requirements.