EDM Bathroom Extractor Fan – Quiet 104 and 158 m³/h Fan with Optional Timer

Frequently asked questions

• What spaces is the EDM extractor fan designed for?

  It is a wall or ceiling extractor with low consumption and a low noise level, ideal for bathrooms, storage rooms, grow tents and small grow spaces. It is designed precisely for those places where fitting a duct fan is unnecessary. It runs on 230 V and 50 Hz.

• Should I go for the 10 cm or the 12 cm?

  The 10 cm model delivers 104 m3/h at 40 dB and 15 W, and works well in small rooms, grow tents and compact drying areas. The 12 cm model goes up to 158 m3/h at 46 dB and 16 W, that is 50% more airflow for very little difference in consumption. If the space is larger or there is a fair amount of humidity, go for the 12 cm.

• What does the version with timer add?

  The timer version keeps running for a few minutes after you turn off the light or the switch, so it finishes refreshing the air once you have left. That is what makes the difference against humidity and odours. The version without a timer starts and stops with the switch, and it is the logical choice if you are going to control it from an external controller or a timer plug.

• How and where is it installed?

  It mounts on the wall or on the ceiling. The 10 cm model has a 160.5 x 160.5 mm frame with an 85 mm ducted outlet at the back, and the 12 cm one a 180 x 180 mm frame; both have a 2 cm frame thickness and a white finish. Check the available opening before buying to make sure it fits.

• Is it noisy?

  It is a quiet extractor: 40 dB on the 10 cm model and 46 dB on the 12 cm one. Together with its consumption of 15 and 16 W, that makes it comfortable to leave running in parts of the house where noise is a problem.

• Which accessory do you recommend adding?

  The EDM non-return valve (ref. 08412). It stops air and odours coming back inside when the extractor is off, which is especially useful if the unit only runs now and then. It is a simple add-on that noticeably improves the end result.