Growmax Water Tubing for Reverse Osmosis 1/4", 3/8" and 1/2" – Connection Tubing for Filtration Systems
Growmax Water Tubing for Reverse Osmosis 1/4", 3/8" and 1/2" – Connection Tubing for Filtration Systems
-
Sizes: 1/4", 3/8" and 1/2"
-
Length: 10 m (1/4" and 3/8") and 5 m (1/2")
-
Colors: Blue, black and white
-
Connection: Push-fit quick connectors
-
Working pressure: 3 to 6 kg (optimal 4 bar)
-
Availability: Ref. 422115 upon request
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 💧 Three sizes: 1/4", 3/8" and 1/2" to cover the entire Growmax Water range.
- 🚨 Quick connection: Compatible with the push-fit connectors of osmosis systems.
- 📊 Ready-to-use rolls: 10 m in 1/4" and 3/8"; 5 m in 1/2" for supply lines.
- ♻️ Identification colors: Blue, black and white to distinguish between product and reject water.
- 🧪 Note: The 1/4" blue tubing (ref. 422115) is a made-to-order item.
The cheapest consumable in your installation, on which leak prevention depends.
Full description
Growmax Water Tubing for Reverse Osmosis and Filtration: The Connection That Cannot Fail
The Growmax Water reverse osmosis tubing is the flexible connection tubing that links the different components of your system: the mains inlet, filter housings, membrane, storage tank, reject line, and purified water outlet. It is an inexpensive consumable on which the entire system depends: undersized or deteriorated tubing causes leaks, pressure drops, and reduced production.
Available in the three standard sizes of the Growmax Water quick-connect system, in several colors so you can visually identify each line at a glance.
Which size do I need?
- 1/4" (blue or black, 10 m roll): the most common size. This is the size used for the purified water and reject lines in household and cultivation equipment such as the Grow MiniMax 75, the Power Grow 500, or the Maxquarium 000 PPM.
- 3/8" (blue, 10 m roll): for high-flow equipment, where a larger section prevents the line from being restricted. Standard on the Mega Grow 1000 and in systems with the Max Pump 700.
- 1/2" (white, 5 m roll): the largest size, for feed and fill lines in high-production equipment such as the Grow Max 3000 L/day.
Color does not affect performance: it helps prevent confusing the purified water line with the reject line as the system expands.
Special-Order Item
The 10 m roll of 1/4" blue tubing (ref. 422115) is a special-order item. It is not always immediately in stock: it is ordered from the manufacturer upon receipt of your order. If you need it urgently, check availability with us before purchasing, or consider the 1/4" black version, which serves exactly the same purpose.
Installation
All Growmax Water equipment uses push-fit quick connectors: simply make a clean, perpendicular cut in the tubing and insert it fully into the connector. A diagonal cut or burrs are the leading causes of leaks. Always leave some slack in the tubing runs so that the tubing is not under tension, and avoid tight bends that reduce the internal diameter.
Remember: tubing and filters are not the same
Tubing transports water; filters treat it. If your problem is chlorine and sediment, a carbon filter such as the Eco Grow 240 L/h, the Garden Grow 480 L/h, the Super Grow 800 L/h, or the Pro Grow 2000 L/h is sufficient: they remove chlorine but do not lower the EC. If your problem is high EC, you need reverse osmosis. And if you want to achieve 000 ppm, add a deionization kit.
System Operating Conditions
Growmax Water household and commercial reverse osmosis systems operate at 25°C, with a minimum pressure of 3 kg and a maximum of 6 kg (optimal 4 bar), a reference water of 500 ppm TDS, and a reject ratio of approximately 2:1. Do not exceed 6 kg of pressure in the line: this is the operating limit for the tubing and quick connectors.
Related Products
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Identify the size used by your equipment: 1/4" in most home reverse osmosis systems, 3/8" or 1/2" in higher-flow systems.
2. Measure the actual length needed, allowing a little slack so that the tubing is not under tension or forms tight bends.
3. Cut the tubing with a sharp utility knife or tubing cutter, always cutting perpendicularly and leaving no burrs.
4. Insert the tubing fully into the quick connector until it stops, then pull gently to check that it is securely gripped.
5. Use different colors for the product water line and the waste line: this will help you avoid mistakes during future maintenance.
6. Open the water supply slowly, check each connection, and ensure there are no leaks before leaving the equipment running unattended.

Growmax Water Tubing for Reverse Osmosis 1/4", 3/8" and 1/2" – Connection Tubing for Filtration Systems
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
It is the flexible tubing that links the different parts of your installation: mains inlet, filter housings, membrane, tank, waste line and product water outlet. It is a cheap consumable that the whole installation depends on, because tubing of the wrong size or in poor condition causes leaks, pressure drops and a loss of output.
-
The 1/4 inch in a 10 m roll is the most common one, used for the product water and waste lines on units such as the Grow MiniMax 75, the Power Grow 500 or the Maxquarium 000 PPM. The 3/8 inch in a 10 m roll is for units with a higher flow rate, like the Mega Grow 1000 or installations with a Max Pump 700. And the 1/2 inch in a 5 m roll is the large size, for feed and filling lines on high-output units such as the Grow Max 3000 L/day.
-
No, the colour does not change performance. It is there so you can tell each line apart at a glance and not mix up the clean water line with the waste line as the installation grows. It is a detail you really appreciate while assembling.
-
All Growmax Water units use push-fit quick connectors: make a clean, square cut in the tubing and push it all the way into the connector. An angled cut or one with burrs is the number one cause of leaks. Leave a little slack in the runs so the tubing is not under tension, and avoid tight bends that reduce the inside diameter.
-
Yes, the blue 1/4 inch tubing in 10 m, reference 422115, is a made-to-order item and is not always in immediate stock: it is ordered from the manufacturer once we receive your order. If you need it urgently, check availability with us before buying or consider the black 1/4 inch version, which does exactly the same job.
-
Do not exceed 6 kg of pressure in the line: that is the working limit of both the tubing and the quick connectors. Growmax Water units operate at 25 degrees, with a minimum pressure of 3 kg and a maximum of 6 kg, 4 bar being the optimum, on reference water of 500 ppm TDS.