Hanna EC Calibration Solution 12880 µS/cm – 230 ml Bottle for Conductivity Meters
Hanna EC Calibration Solution 12880 µS/cm – 230 ml Bottle for Conductivity Meters
-
Type: EC calibration standard
-
Value: 12.880 µS/cm at 25 °C
-
Format: 230 ml bottle
-
Preparation: NIST traceable KCl
-
Shelf life: 5 years unopened
-
Reference: HI7030M
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- ⚡ 12,880 µS/cm standard: High-range calibration point at 25 °C for conductivity meters and EC meters.
- ✅ NIST-traceable KCl: Prepared with potassium chloride solution traceable to NIST standards.
- 🔒 Hermetic packaging: Tamper-evident seal with batch number and expiration date printed on the label.
- 🗓️ 5-year shelf life: From the date of manufacture with the unopened container, always ready when you need it.
- 🎯 Correction table: Each bottle has the temperature correction for the actual value in µS/cm printed on it.
The 230 ml bottle of the 12880 µS/cm conductivity standard from Hanna Instruments, with NIST traceability.
Full description
Hanna EC 12880 µS/cm Calibration Solution – 230 ml Bottle for Conductivity Meters
Hanna Instruments' EC 12880 µS/cm Calibration Solution is the reference conductivity standard for the high range, essential when your meter works with two calibration points or with waters very loaded with salts. An uncalibrated conductivity meter drifts over time and with the dirt accumulated on the sensor, and that drift translates directly into errors in the dosing of the nutrient solution. This 230 ml bottle is prepared with NIST traceable KCl solution and incorporates on the label the temperature correction table so that you can check the real value at the working temperature.
Key Features
- High range standard: 12,880 µS/cm at 25 °C, the usual second calibration point in two-point EC meters.
- NIST traceable KCl: prepared with potassium chloride solution traceable to NIST standards to ensure the stated value.
- Batch and expiration date clearly visible: the batch number and expiration date are printed on the label, so you always know what you are calibrating with.
- Hermetic container with tamper-evident seal: guarantees that the solution arrives intact and without concentration alterations.
- Temperature correction table: printed on each bottle, it indicates the real value in µS/cm at different temperatures.
Technical Specifications
- Solution type: conductivity standard (EC calibration)
- Value: 12,880 µS/cm at 25 °C
- Preparation: NIST traceable KCl solution
- Identification: batch number and expiration date printed on the label
- Container: hermetic, with tamper-evident seal
- Expiration: 5 years from manufacture with the container unopened
- Temperature correction: table with the real value in µS/cm printed on each bottle
- Format: 230 ml bottle
- Reference: HI7030M
- Brand: Hanna Instruments
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Check the label to ensure the solution is within its expiration date and that the seal has not been tampered with.
2. Rinse the meter's electrode with distilled or deionized water and remove any excess water.
3. Pour a small amount of solution into a clean cup; never insert the electrode into the bottle.
4. Submerge the electrode until the measuring band is covered, shake gently to dislodge any bubbles, and wait for the reading to stabilize.
5. Confirm the calibration point of 12880 µS/cm; if the meter does not compensate for temperature, consult the correction table printed on the bottle.
6. Discard the used solution, close the bottle tightly, and store it in a cool, shaded place.

Hanna EC Calibration Solution 12880 µS/cm – 230 ml Bottle for Conductivity Meters
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
From 2% to 10% on every purchase depending on your level
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
Free discreet packaging as a PRO CLUB member
Extended warranty
Up to 90 days to return depending on your level
Frequently asked questions
-
It is the reference conductivity standard for the high range, essential when your meter works with two calibration points or with water that is very high in salts. It is usually the second standard point on two-point EC meters.
-
An uncalibrated conductivity meter drifts over time and with the dirt that builds up on the sensor. That drift translates directly into dosing errors in the nutrient solution, which is exactly what you want to avoid.
-
Yes, and that is why each bottle has the temperature correction table printed on the label. With it you can check the real value in µS/cm at the temperature you are working at, since the nominal value of 12,880 µS/cm is referenced to 25 °C.
-
The container is airtight and carries a tamper-evident seal, which guarantees that it arrives intact and with no change in concentration. The batch number and the expiry date are also printed on the label so you always know what you are calibrating with.
-
With the container unopened, the shelf life is 5 years from manufacture. Even so, it is worth checking the date printed on the label before using it.
-
It comes in a 230 ml bottle with the reference HI7030M from Hanna Instruments. It is prepared with a KCl solution traceable to NIST standards, which is what guarantees the stated value.