Jonix Inside Duct – Purificador de Plasma Frío para Conducto de Extracción

Frequently asked questions

• Where is the Jonix Inside Duct installed?

  It is fitted inside the extraction line itself, in the ducting, and treats the whole airflow passing through it. Being in-line, it takes up no space in the room and does not require a separate unit.

• What do I gain over a carbon filter?

  A carbon filter holds odour molecules until it is saturated and has to be replaced every so many months. Cold plasma breaks them down and accumulates nothing, so the unit keeps its performance until the generator is due for a change. There is also no gradual loss of airflow from clogging.

• Which model should I choose for my setup?

  There are four airflow ratings. The 2S at 500 m³/h covers a small room or a large tent; the 4S at 1,000 m³/h, a medium room with a 250-315 mm fan; the 2L at 2,000 m³/h, a setup with several rooms on the same line; and the 4L at 4,000 m³/h, professional high-airflow installations.

• How do I work out the airflow to size it properly?

  Choose the model from your fan's real airflow, not its nominal figure: a 1,000 m³/h fan with bends and a filter may be moving considerably less. If you are torn between two models, go up to the larger one, because working with headroom always performs better.

• Does it leave ozone in the grow room?

  No. The reaction takes place inside the unit, so there is no ozone in the room. That is exactly what you want if you need to remove the odour from the extraction air without exposing your plants.

• Will I lose extraction airflow over time?

  No, because it does not clog up like a carbon filter. Since it retains nothing, the pressure drop does not keep rising month after month and your fan goes on moving the air just as it did on day one.