Optipar Intelligent Controller 0-10V – Lighting Controller with Touch Screen

Optipar lighting controller with touchscreen and 0-10 V output. It is a wired, non-Wi‑Fi controller: the signal travels by cable, which avoids depending on network coverage inside the room.

What it programs

• On and off cycles of the photoperiod.
• Sunrise and sunset: gradual ramp-up and ramp-down transitions.
• Overall intensity of the connected luminaires.

Protections

It includes automatic intensity reduction due to overheating and emergency shutdown. If the room temperature gets too high, the controller lowers power on its own instead of waiting for a device to fail.

⚠️ Data not published by the manufacturer

We have not been able to confirm the number of channels or the maximum controlled power. Neither the supplier nor Optipar's official website publishes those data. If your installation is large, contact us before buying and we will verify it with the manufacturer.

Technical data

• Type: lighting controller
• Output: 0-10 V
• Interface: touchscreen
• Connection: wired (no Wi-Fi)
• Protections: temperature reduction and emergency shutdown
• Compatibility: any luminaire with 0-10 V input
• Channels and max. power: not published

The published weight is an estimate.

At GrowIndustry we only work with products of proven quality and trusted brands.

Each item goes through a check before shipping to ensure you receive it in perfect conditions and ready to use.

Your satisfaction is our priority.

1. Comprueba que tus luminarias tienen entrada de dimado 0-10 V.
2. Consúltanos la potencia máxima si vas a gobernar muchas luminarias.
3. Monta el controlador en pared, fuera de la zona húmeda.
4. Cablea la señal 0-10 V desde el controlador a cada luminaria.
5. Da tensión y programa el ciclo en la pantalla táctil.
6. Configura las rampas de amanecer y atardecer y el nivel de intensidad.