Plagron pH- 59% – pH Corrector to Lower the Acidity of Irrigation Water in Crops

Characteristics of Ph Min from Plagron

We have here a product created based on phosphorus oxide, which will be capable of lower the PH levels of your irrigation solutions, to guarantee proper development of the plant. With PH Min, you will get stabilize the PH of the irrigation solution, and can even be kept for several days in the irrigation tank, without the plants being harmed. Furthermore, it is an ideal product for any type of crop. You must not forget that the PH level of your crop is responsible for generating adequate nutrient absorption in the plant. In other words, if the PH levels of the irrigation solution are too low or high, the nutrients and minerals in the fertilizers and fertilizers will be blocked, thus preventing them from being absorbed by the plant. This is why it is recommended always maintain an adequate PH level, that oscillates between 5.5 and 6.5.

Composition and benefits of Ph Min from Plagron

This fabulous PH regulator composed of 59% by phosphoric acid, will ensure that your plants bloom ideally, in any type of crop and environment. It is the best quality PH regulator on the current market. In addition to this, it is a product that performs very well, so you will not waste any of your money.

Dosage and how to use Ph Min from Plagron

• When you have added the fertilizers and additives to the irrigation, you will need to measure the nutrient solution.
• If the PH level of the solution exceeds the scale of 6.5, add 0.5 ml of this fabulous product to the solution.
• After this, you will measure the PH of the irrigation solution again. If the PH still does not drop enough, add another 0.5 ml of the product, until reaching a PH level of between 5.5 - 6.5.
• Implement this fabulous acid in your crops today. We assure you that you will achieve extraordinary harvests.

At GrowIndustry we only work with products of proven quality and trusted brands.

Each item goes through a check before shipping to ensure you receive it in perfect conditions and ready to use.

Your satisfaction is our priority.

1. Prepara el agua con todos los nutrientes y aditivos primero.
2. Mide el pH de la solución preparada.
3. Si el pH está alto, añade pH- 59% gota a gota mezclando tras cada adición.
4. Al 59%, una cantidad mínima baja mucho el pH: usa con extrema precaución.
5. Vuelve a medir hasta alcanzar el pH objetivo para tu sustrato.
6. Para tierra: pH 6,0-6,5. Para coco e hidro: pH 5,5-6,0.