Pure Factory CO₂ Regulator – Pressure Reducer for CO₂ Cylinder with Pressure Gauge
Pure Factory CO₂ Regulator – Pressure Reducer for CO₂ Cylinder with Pressure Gauge
-
Tipo: Dosificador de CO2 con electroválvula
-
Material: Latón con ventana de policarbonato
-
Incluye: Manómetro, caudalímetro y válvula de solenoide
-
Nivel Recomendado: 1500 ppm o inferior en interior
Envío 24/72h
Seguro y sin sorpresas
Pago seguro SSL
Tu pago 100% seguro
Descubre las ventajas del PRO CLUB
Descuentos de hasta -12%, envíos prioritarios y más.
Devolución fácil en 15 días
Sin preguntas
Descripción
CO2 is a very beneficial gas for plants. However, you have to contribute the right levels for its optimal development. If you want to control that it does not release too CO2, you can use the CO2 Dosing with solenoid valve. So not only measure the level you give to your plants, but you control so as not to run out of gas in the bottle.
Descripción completa
Features of the Co2 dispenser with solenoid valve
The CO2 dispenser with solenoid valve will allow you to know the flow of CO2 you release. A very comfortable device to open and close the outlet of CO2 from the cylinder. In addition, it comes with a plug and play connection so you can make all the connections quickly and easily. The dispenser is made of brass and comes with sintered filter, high resistance polycarbonate window and threaded connection.
How to install and use the Co2 dispenser with solenoid valve?
The solenoid valve of the dispenser is the one that receives the order to open or close to generate more or less CO2. The CO2 dispenser with solenoid valve You can also connect it to a timer or to a CO2 controller to gain precision and effectiveness. Thus, these devices will be responsible for opening and closing the solenoid valve of the dispenser and maintaining control of the PPM that is provided to the crop plants. A fundamental accessory that It has a pressure gauge, flowmeter and solenoid valve. The manometer and the flowmeter are those that control the flow of CO2 and the amount of gas left in the bottle. All united in one piece and ready to connect to the CO2 cylinder and timer or controller. That is why its installation is quick and simple.
What levels of Co2 should you use in the dispenser?
Plants admit higher concentrations 0.15% or 1500 PPM. This level or lower is the one you should use in the dispenser, since it is the most recommended for indoor crops. By the way, CO2 is necessary for plants during the day, since at night it is a gas that does not generate a positive effect.
Garantía
En GrowIndustry solo trabajamos con productos de calidad contrastada y marcas de confianza.
Cada artículo pasa por un control antes del envío para asegurar que lo recibes en perfectas condiciones y listo para usar.
Tu satisfacción es nuestra prioridad.
Cómo usar
