Trolmaster ECS-4 Waterproof Cable Extension 16ft – Extension Cable for AMP-2 Sensor
Trolmaster ECS-4 Waterproof Cable Extension 16ft – Extension Cable for AMP-2 Sensor
-
Length: 4.8 meters (16ft)
Connector: Male/female compatible with AMP-2
Resistance: Waterproof cable
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 📏 4.8 meters of reach: 16 feet of cable to separate the sensor from the main controller.
- 🔌 Male and female connector: Directly compatible with the AMP-2 sensor board.
- 💧 Water-resistant: Suitable for grow rooms and reservoir areas with high humidity.
- ⚙️ Plug and Play: Immediate installation within the TrolMaster system without configuration.
The TrolMaster ECS-4 cable extends the reach of your AMP-2 without compromising the signal.
Full description
TrolMaster ECS-4 — 16ft Waterproof Extension Cable for AMP-2 Sensor
The TrolMaster ECS-4 is a 4.8-meter (16 ft) waterproof extension cable designed for use with the AMP-2 sensor board. With one male end and one female end, it extends the distance between the sensor board and the main controller, facilitating installations where the sensor must be located far from the central unit.
ECS-4 Features
- 4.8-meter (16 ft) length to extend wiring range.
- Male/female connector compatible with the AMP-2 sensor board.
- Water-resistant cable, suitable for installations in grow rooms.
- Simple, plug-and-play installation with the TrolMaster system.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Connect the male end of the ECS-4 to the AMP-2 sensor board.
2. Connect the female end to the main controller or another extension cable.
3. Secure the cable firmly to prevent strain on the connections.

Trolmaster ECS-4 Waterproof Cable Extension 16ft – Extension Cable for AMP-2 Sensor
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
From 2% to 10% on every purchase depending on your level
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
Free discreet packaging as a PRO CLUB member
Extended warranty
Up to 90 days to return depending on your level
Frequently asked questions
-
Es un cable alargador que amplía la distancia entre la placa del sensor AMP-2 y el controlador principal. Te permite colocar el sensor donde realmente interesa medir, aunque quede lejos de la unidad central.
-
Tiene 4,8 metros de longitud, equivalentes a 16 pies. Es un margen suficiente para salvar la mayoría de distancias dentro de una sala de cultivo.
-
Está diseñado específicamente para usarse con la placa del sensor AMP-2. Lleva un extremo macho y otro hembra, de manera que se intercala directamente en la conexión existente.
-
En absoluto: es plug and play dentro del sistema TrolMaster. Conectas un extremo al sensor y el otro al cableado que va al controlador, sin configuración adicional.
-
Sí, es un cable resistente al agua pensado precisamente para instalaciones en salas de cultivo. Esa protección evita problemas cuando el tendido pasa por zonas donde se riega o pulveriza.
-
Cuando el cable original del sensor AMP-2 se te queda corto y el sensor tiene que ir lejos del controlador principal. Es la forma limpia de ganar alcance sin empalmes ni soluciones improvisadas.