Water Master Electrode for EC-Pro Conductivity Meter
Water Master Electrode for EC-Pro Conductivity Meter
-
EC Range: 0.00 to 1999 μS
Resolution: 10 µS/cm
EC Accuracy: ±0.1 FS
Weight: 0.02 kg
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🔧 Original spare part: Specific sensor for the Water Master EC-PRO conductivity meter, ref. 411114.
- 📊 0 to 1999 μS range: Measures electrical conductivity with a resolution of 10 µS/cm.
- 🎯 Factory accuracy: With ±0.1 FS, it restores the original accuracy when the electrode wears out.
- 💶 Real savings: Avoid having to replace the entire meter when only the sensor fails.
The Water Master replacement electrode restores the original accuracy of your EC-PRO conductivity meter.
Full description
Water Master Electrode for EC-Pro Conductivity Meter
The Water Master Electrode for EC-Pro Conductivity Meter is the original replacement sensor for the EC-PRO conductivity meter (ref. 411114). It is the component that allows you to measure the electrical conductivity (EC) of water or nutrient solution quickly and accurately. Very easy to install and replace, it is suitable for home growers, laboratories, and professionals who need to keep their measuring equipment always calibrated and in perfect working order.
Benefits
- Original replacement. Restores the factory accuracy of the EC-PRO conductivity meter when the original electrode wears out.
- Easy installation. Replaced quickly without the need for special tools.
- Accurate readings. Accuracy of ±0.1 FS for measuring conductivity reliably.
- Cost savings. Avoid having to replace the entire meter when only the electrode fails.
- Versatile use. Suitable for growers, laboratories, and professionals in general.
Key features
- Replacement electrode specifically for the Water Master EC-PRO conductivity meter (411114).
- Measures electrical conductivity (EC) quickly and accurately.
- Measuring range from 0.00 to 1999 μS.
- Resolution of 10 µS/cm.
- Compatible with the meter's battery power system.
Technical specifications
- Brand: Water Master
- Compatible with: EC-PRO Conductivity Meter (ref. 411114)
- Conductivity range: 0.00 to 1999 μS
- Resolution: 10 µS/cm
- EC accuracy: ±0.1 FS
- Equipment power source: 2x3V battery (CR2032 type)
- Dimensions: 17 x 3.35 cm
- Weight: 0.02 kg
How to use
- Turn off. Turn off the EC-PRO conductivity meter before handling the electrode.
- Removal. Remove the worn electrode by unscrewing it from the meter housing.
- Installation. Screw the new Water Master electrode into place until it is secure.
- Calibration. Calibrate the equipment with an EC calibration solution before use.
- Measurement. Immerse the electrode in the solution to be measured and wait for the reading to stabilize.
- Care. Rinse the electrode with distilled water after each use and store it protected from dirt.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Turn off the EC-PRO conductivity meter before handling the electrode.
2. Remove the worn electrode by unscrewing it from the meter body.
3. Screw the new Water Master electrode into place until it is secure.
4. Calibrate the device with an EC calibration solution before use.
5. Immerse the electrode in the solution to be measured and wait for the reading to stabilize.
6. Rinse the electrode with distilled water after each use and store it protected from dirt.

Water Master Electrode for EC-Pro Conductivity Meter
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
From 2% to 10% on every purchase depending on your level
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
Free discreet packaging as a PRO CLUB member
Extended warranty
Up to 90 days to return depending on your level
Frequently asked questions
-
Es el recambio original del sensor del conductivímetro Water Master EC-PRO, referencia 411114. Está pensado específicamente para ese equipo, así que el ajuste es directo. Si tu medidor es otro modelo, este electrodo no es el que necesitas.
-
Apaga el conductivímetro EC-PRO antes de manipular nada. Retira el electrodo desgastado desenroscándolo de la carcasa del medidor y enrosca el nuevo en su lugar hasta que quede firme. No necesitas herramientas especiales.
-
Sí. Una vez montado el electrodo nuevo, calibra el equipo con una solución de calibración EC antes de usarlo. Después ya puedes sumergirlo en la solución a medir y esperar a que la lectura se estabilice.
-
Mide conductividad eléctrica en un rango de 0.00 a 1999 microsiemens, con una resolución de 10 microsiemens por centímetro y una precisión de más menos 0.1 FS. Es suficiente para controlar con fiabilidad el agua o la solución nutritiva. Con el electrodo original recuperas la precisión de fábrica del aparato.
-
Enjuaga el electrodo con agua destilada después de cada uso y guárdalo protegido de la suciedad. Esa rutina evita que queden restos de sales sobre el sensor y que las lecturas se desvíen. Es un gesto de pocos segundos que alarga bastante su vida.
-
Sí, es el planteamiento de este recambio: evitar sustituir el medidor entero cuando solo falla el electrodo. Resulta un ahorro claro y deja el equipo listo para seguir midiendo con fiabilidad. Es una opción válida tanto para cultivadores particulares como para laboratorios y profesionales.