Growlink M8 4-Pin 5m Cable – Extension for ClimaLink/TerraLink Sensors
Growlink M8 4-Pin 5m Cable – Extension for ClimaLink/TerraLink Sensors
-
Connector: M8, threaded, male-female
Length: 5 m
Gauge: 24 AWG, PVC
Compatibility: ClimaLink and TerraLink sensors
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🔧 Greater range: Extends the distance between sensor and controller without signal loss.
- 🔧 Clean installation: Avoids strained cables and tangles.
- 🔧 Quick maintenance: Easy-to-connect M8 threaded connection.
- 🔧 Direct compatibility: Designed for ClimaLink and TerraLink sensors.
Extend the range of your Growlink sensors without splices or signal loss.
Full description
Growlink M8 4-Pin 5m Cable – ClimaLink/TerraLink Sensor Extension
The 5m M8 extension cable for ClimaLink/TerraLink sensors allows you to place the sensors further away from the control point without splices or soldering, maintaining a stable and tidy connection in the installation. It is the practical solution for reaching beds, tables, or areas where the standard sensor cable does not reach, reducing strain and extending the life of the assembly.
Benefits
- More reach without losses. Extends the distance between the sensor and the controller while maintaining signal integrity.
- Cleaner installation. Avoids tight cables and tangles; allows routing through trays and cable management systems.
- Quick maintenance. M8 threaded connection for easy coupling/uncoupling.
- Versatile. Suitable for organizing sensors on tables, beds, and hard-to-reach areas.
- Direct compatibility with ClimaLink and TerraLink sensors from the Growlink ecosystem.
Technical specifications
- Connector: M8, threaded, male–female
- Length: 5 m
- Compatibility: ClimaLink and TerraLink sensors with M8 connector
- Installation: direct connection, no splices
- Contents: 1 5m M8 extension cable
How to use
- Plan the route. Define the path through trays or cable management systems, avoiding foot traffic areas and heat sources.
- Connect the cable. Screw the male end to the sensor and the female end to the system's M8 port.
- Secure the run. Secure the cable with zip ties without strangling it, leaving a small amount of slack near the sensor.
- Verify the reading. Check on the panel that the sensor is transmitting correctly.
- Maintenance. Periodically check the fastening points and the condition of the threads.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Plan the cable route through trays or cable ducts.
2. Screw the male end to the sensor and the female end to the system's M8 port.
3. Secure the cable run with cable ties without constricting the cable.
4. Check the panel to ensure the sensor is transmitting correctly.
5. Periodically inspect the mounting points and the condition of the threads.

Growlink M8 4-Pin 5m Cable – Extension for ClimaLink/TerraLink Sensors
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
From 2% to 10% on every purchase depending on your level
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
Free discreet packaging as a PRO CLUB member
Extended warranty
Up to 90 days to return depending on your level
Frequently asked questions
-
It lets you move sensors further from the control point without splices or soldering. That way you can reach beds, tables or areas the sensor's standard cable does not cover, keeping the connection stable and the installation tidy.
-
It is directly compatible with the ClimaLink and TerraLink sensors in the Growlink ecosystem that use an M8 connector. If your sensor uses that connector, it plugs straight in.
-
It is 5 metres long and has a threaded 4-pin M8 connector, with one male end and one female end. The thread lets you connect and disconnect quickly when maintenance is due.
-
First plan the route along trays or cable ducts, avoiding walkways and heat sources. Then screw the male end to the sensor and the female end to the system's M8 port, secure the run with cable ties without pinching the cable, and check on the panel that the sensor is transmitting correctly.
-
It includes 1 M8 extension cable, 5 metres long. It is a single piece ready to be fitted between the sensor and the controller, with no additional accessories.
-
Checking the fixing points and the condition of the threads now and then is enough. Leaving a little slack near the sensor prevents tugging and extends the service life of the whole assembly.