Ipae Progarden 2 L Polypropylene Pressure Sprayer – Pre-Pressure Sprayer for Crop Cultivation
Ipae Progarden 2 L Polypropylene Pressure Sprayer – Pre-Pressure Sprayer for Crop Cultivation
-
Capacity: 2 L
-
Material: Polypropylene
-
Color: Green
-
Type: Pre-press
-
Weight: 0.263 kg
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🧴 Priming: Pump once and spray continuously.
- 📏 2 liters: Treat several plants in a row without having to refill.
- 🌱 Easy on the hand: Much more comfortable than a trigger sprayer.
- 💧 Adjustable nozzle: Adjust the droplet size according to the treatment.
- 💦 Polypropylene: Suitable for aqueous foliar fertilizer solutions.
A step up in quality from the trigger sprayer.
Full description
Ipae Progarden 2 L Polypropylene Pressure Sprayer
2-liter pre-pressure sprayer: pressure builds up by pumping the plunger and is then applied continuously without the need to squeeze a trigger. It is much more comfortable than a manual spray bottle when treating several plants in a row, as it does not tire the hand. Polypropylene body for aqueous solutions of foliar fertilizers and natural treatments.
Key Features
- Pre-pressure system: pump once and spray continuously.
- 2-liter capacity to treat several plants without refilling.
- Does not tire the hand like trigger sprayers.
- Polypropylene body resistant to aqueous solutions.
- Adjustable nozzle to control the droplet size.
Technical Specifications
- Capacity: 2 L
- Material: Polypropylene
- Color: Green
- Type: Pre-pressure
- Weight: 0.263 kg
- EAN: 8719202205664
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Unscrew the pump assembly and fill the tank with no more than 2 liters.
2. Screw the pump back on and tighten it well to prevent pressure loss.
3. Pump the plunger 15 to 20 times until you feel resistance.
4. Adjust the nozzle by turning the tip to the desired spray pattern.
5. Spray from a distance of about 30 cm, and pump again when the pressure drops.
6. Release any remaining pressure, empty, and rinse the tank after each use.

Ipae Progarden 2 L Polypropylene Pressure Sprayer – Pre-Pressure Sprayer for Crop Cultivation
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
From 2% to 10% on every purchase depending on your level
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
Free discreet packaging as a PRO CLUB member
Extended warranty
Up to 90 days to return depending on your level
Frequently asked questions
-
You build up pressure by pumping the plunger and then spray continuously, without squeezing a trigger each time. You pump once and spray without stopping until the pressure drops. That is the system used by the 2-litre Ipae Progarden.
-
Yes, especially when you have to treat several plants one after another, because it does not tire your hand like a trigger does. As you are not repeating the squeezing motion, you can concentrate on covering the foliage properly. For a two-second touch-up, though, a trigger spray is quicker.
-
The 2-litre capacity lets you treat several plants without refilling, which is exactly what this format is for. It saves you stopping halfway through to mix more solution. It is a convenient size for grow tents and terraces.
-
The body is polypropylene, resistant to water-based solutions of foliar feeds and natural treatments. It is a light material that stands up well to regular use in the grow. Even so, rinse it out when you finish so no dried residue is left inside.
-
Yes, the nozzle is adjustable and lets you set the droplet size. You can go from a finer mist for foliar feeds to a larger droplet when you want to wet things quickly. You adjust it by turning the nozzle itself.
-
It is good practice to release any remaining pressure and empty the tank before storing it. Then rinse it with clean water and spray a little to clear any residue from the nozzle. Store it dry and with the plunger unloaded.