EDM 2-Way Valve with ½"-¾" Valves – Two water outlets for very little
EDM 2-Way Valve with ½"-¾" Valves – Two water outlets for very little
-
Type: 2-way distributor
-
Valves: 1 per outlet
-
Material: Polypropylene
-
Connection: Ø26.5 mm - ¾"
-
Color: Gray / Orange
-
Weight: 0.05 kg
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🔗 2 outlets with valves: Open and close each line independently.
- 💧 Everything connected: Drip and hand hose ready at the same time.
- 📐 ¾" connection: Fits faucets with a Ø26.5 mm connection, the standard size.
- ☀️ Only 50 g: Minimal weight, does not strain the faucet thread.
- ⏱️ Instant installation: Screws on by hand in less than a minute.
Double your water outlets for the price of a coffee.
Full description
EDM 2-Way Tap Splitter with Valves for ½"-¾" Threaded Taps
Two-outlet splitter with a stopcock on each outlet, the most economical solution for doubling the water outlets of a tap. It allows you to leave the drip irrigation connected on one side and the hose reel on the other, opening only what you need. Made of polypropylene, it screws onto Ø26.5 mm - ¾" taps and weighs just 50 g.
Key features
- Two independent outlets with their own stopcock.
- Allows two lines to remain permanently connected.
- Grey and orange polypropylene body.
- Ø26.5 mm - ¾" tap connection.
- Minimal weight, just 50 g.
Technical specifications
- Brand: EDM
- Type: 2-way tap splitter with stopcocks
- Material: Polypropylene
- Connection: Ø26.5 mm - ¾"
- Color: Grey / Orange
- Weight: 0.05 kg
- EAN: 8425998744323
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Close the faucet and remove any installed accessories.
2. Screw the manifold onto the ¾" faucet outlet.
3. Tighten by hand, checking that the gasket is properly seated.
4. Connect a hose or irrigation line to each outlet.
5. Close both valves and fully open the faucet.
6. Open only the path you intend to use.

EDM 2-Way Valve with ½"-¾" Valves – Two water outlets for very little
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
It doubles the water outlets on a tap: its two independent outlets each have their own shut-off valve. That way you can leave two lines permanently connected and open only the one you need.
-
The classic example is leaving the drip system set up on one side and the hand-held hose on the other. You water automatically and, when you want to hose down or water by hand, you just open the other valve.
-
It screws onto Ø26.5 mm taps, that is, a 3/4 inch thread, the most common size on garden taps. The connection is direct, with no extra adapters.
-
Not at all: made of polypropylene, it weighs just 50 grams. It is one of the lightest accessories in its category and puts no load on the tap thread.
-
Yes, it is the cheapest way to double the water outlets on a tap. It does its job with a simple polypropylene body in grey and orange.
-
In stock, orders placed before 2:00 p.m. ship the same business day and arrive 1 to 3 business days later; you'll see the estimated delivery date on the product page. You can pay by card, Bizum, PayPal or in instalments with Klarna or ViaBill. If it is not what you wanted, you have easy returns within 30 days.