Indizono 2.0 In-Duct Ozone Generator with Door – Quick Access to the Ozone Plates
Indizono 2.0 In-Duct Ozone Generator with Door – Quick Access to the Ozone Plates
-
Production: 3,500 mg/h (150 mm) or 7,000 mg/h (200 and 250 mm)
-
Technology: ceramic plates, patented system
-
Access: airtight door for replacing the plates
-
Consumption: from 30 W depending on the model
-
Plate life: from 14 to 18 months
-
Capacity: up to 7,000 m³ purified in the 250 mm model
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🚪 Hermetic door: replace the plates without removing the unit from the duct.
- ♻️ Ceramic plates: a much cheaper replacement than a UV lamp.
- ⏳ 14-18 months of life per plate.
- ⚡ Minimum power consumption: from 30 W for the 3,500 mg/h model.
- 📏 Three sizes: 150, 200 and 250 mm depending on your duct.
The 2.0 version of Indizono: the same ozone, maintenance without removing anything.
Full description
Indizono 2.0: the same ozonizer, but with a door
The second generation of Indizono duct ozonizers adds a sealed door that allows you to replace the ceramic plates without removing the unit from the exhaust duct. This is the only difference from the classic version, and it is the deciding factor if you plan to maintain it yourself.
Why the door matters
The plates need to be replaced every 14–18 months
The ceramic plate has a lifespan of 14 to 18 months. In the classic model, replacing it means disconnecting the ozonizer from the duct, removing it, and reinstalling it. With the door, you open it, replace the plate, and close it without touching the installation.
Patented plate system, not a lamp
Indizono generates ozone using ceramic plates instead of a UV lamp. They produce the same amount of ozone or more, and replacement is significantly cheaper than a lamp.
Minimal power consumption
Between 30 W for the 3,500 mg/h model and 90 W for the larger models in the range: it can run in cycles without weighing down your electricity bill.
Which size to choose
- 150 mm inlet · 3,500 mg/h — for small cabinets and rooms.
- 200 mm inlet · 7,000 mg/h — medium rooms and 200 mm ducts.
- 250 mm inlet · 7,000 mg/h — purifies up to 7,000 m³, for large installations or multiple rooms.
Choose the inlet that matches your exhaust duct and the production level according to the airflow to be treated.
How to install it
It is installed in the duct, after the extractor fan, leaving some ducting before the outdoor vent so that the ozone can work. Ozone should not come into contact with the plants or pass through the extractor fan or the light bulb: it removes the aroma and flavor of the harvest and oxidizes metal surfaces.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Choose the duct that matches the diameter of your exhaust duct.
2. Insert the ozonizer into the duct, always after the extractor fan.
3. Leave several meters of ducting before the outdoor vent.
4. Do not allow the ozone to come into contact with the plants: it strips them of their aroma and flavor.
5. Prevent it from passing through the extractor fan or the light bulb: it oxidizes metal parts.
6. Replace the plate every 14–18 months by opening the door, without dismantling the equipment.

Indizono 2.0 In-Duct Ozone Generator with Door – Quick Access to the Ozone Plates
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Envío gratis antes
Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
The only difference is the airtight door this second generation brings. Thanks to it you can replace the ceramic plates without removing the unit from the extraction duct: open, swap, close. If you are going to do the maintenance yourself, that is exactly the detail that decides the purchase.
-
The ceramic plate has a working life of 14 to 18 months. On the classic model, changing it means disconnecting the ozone generator from the duct, taking it out and reinstalling it; with the 2.0 door it is done without touching the installation.
-
The 150 mm model with 3,500 mg/h works well for tents and small rooms. The 200 mm one with 7,000 mg/h covers medium rooms and 200 mm ducting. The 250 mm, also 7,000 mg/h, purifies up to 7,000 m³ and is the one for large installations or several rooms. Choose the duct size that matches your extraction ducting and the output according to the airflow to be treated.
-
It goes in line with the extraction duct, always after the fan and leaving a run of ducting before the outlet to the outside so the ozone has time to act. It is a simple installation that requires no building work or special accessories.
-
Very little: the 3,500 mg/h model stays at 30 W and the larger units in the range reach 90 W. At that consumption you can leave it running in cycles without noticing it on your bill.
-
Yes, if it is installed wrongly, which is why the order matters. Ozone must not touch the plants or pass through the fan or the lamp: it strips aroma and flavour from the harvest and oxidises metal surfaces. Fitted after the fan, as the manufacturer states, there is no problem.