Pure Factory 600W Electromagnetic Ballast – Fission, EMB, Lux Plus and Pure Light V2
Pure Factory 600W Electromagnetic Ballast – Fission, EMB, Lux Plus and Pure Light V2
-
Type: Electromagnetic ballast
-
Power: 600 W
-
Lamps: HPS and MH
-
Voltage: 220-240 V
-
Regulation: Non-dimmable
-
Weights: 4.5 to 5.3 kg (estimated)
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- ⚡ 600 W HPS and MH: Six electromagnetic models at 220-240 V.
- 💰 The most affordable: With no electronics to fail, they last for years.
- 🔌 Open or closed: The closed version is plug and play and safer.
- 🔧 With cable included: The Pure Light V2 plug and play comes with a C-14 cable.
- ⚠️ None are dimmable: If you need dimming, choose an electronic one.
The cheapest and most durable way to power a 600 W lamp.
Full description
600 W electromagnetic ballasts for HPS and MH lamps at 220-240 V. They are the most economical and robust option: with no electronics to fail, they last for years. On the downside, none are dimmable and they weigh quite a bit more than an electronic one.
Open or closed: the difference that matters
- Open: the winding is visible on a base plate. Cheaper and dissipates heat better, but it is not plug and play: it requires electrical assembly and must be installed out of reach, in a dry and protected area.
- Closed: the winding is inside a housing, with wiring already done. Safer, cleaner, and plug and play in most models.
The six models
- Fission open: 600 W, 3.5-5 kV start-up. Not plug and play.
- EMB closed: class 1 enclosed housing. Not plug and play.
- Lux Plus open: the most economical option in the range.
- Lux Plus closed: plug and play.
- Pure Light V2 closed: plug and play, version 2.
- Pure Light V2 plug and play + cable: includes 3x1.5 C-14 cable, 1.5 m.
Technical data
- Type: electromagnetic ballast
- Power: 600 W · Lamps: HPS and MH
- Voltage: 220-240 V
- Dimming: none are dimmable
- Formats: open and closed
⚠️ The supplier does not publish a technical data sheet for the Lux Plus open: its data have been inferred from the range. The weights are estimates.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Choose closed if you want plug and play; open only if you know how to wire.
2. Install the ballast outside the cabinet, in a dry and ventilated area.
3. Do not rest it on the floor or on flammable material: it gets hot.
4. Connect the 600 W lamp reflector to the ballast output.
5. Plug into a grounded 230 V outlet.
6. Program the photoperiod with a timer: it does not support dimming.

Pure Factory 600W Electromagnetic Ballast – Fission, EMB, Lux Plus and Pure Light V2
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
There are six: Fission open, EMB enclosed, Lux Plus open, Lux Plus enclosed, Pure Light V2 enclosed and Pure Light V2 plug and play with cable. All of them are 600 W electromagnetic ballasts for HPS and MH lamps at 220-240 V.
-
In the open format the winding is exposed on a plate: it costs less and dissipates heat better, but it is not plug and play and requires electrical assembly, installing it out of reach in a dry, protected area. In the enclosed format the winding sits inside a housing with the wiring already done, which is safer, tidier and plug and play on most models.
-
No: none of the six models is dimmable. If you need to adjust the power between growth and flowering, you will have to look at an electronic ballast with a dimmer.
-
The Lux Plus enclosed, the Pure Light V2 enclosed and the Pure Light V2 plug and play version with cable, which also includes a 3x1.5 C-14 cable 1.5 m long. The Fission open and the EMB enclosed class 1 are not, and need assembly.
-
It is the cheapest and most robust option: with no electronics to fail, they last for years. In exchange, none of them is dimmable and they weigh considerably more than an electronic ballast, something to bear in mind depending on how you plan to install it.
-
We would rather be upfront: the supplier does not publish a datasheet for the Lux Plus open, whose figures have been inferred from the rest of the range, and the weights given are estimates. If you need an exact figure for your set-up, contact us before buying.