Rapitest 3 in 1 – pH, Humidity and Light Meter for Substrates and Soil without Batteries
Rapitest 3 in 1 – pH, Humidity and Light Meter for Substrates and Soil without Batteries
Pay in one tap with Bizum — no extra fees.
-
Rapitest 3-in-1 meter to simultaneously measure pH, light, and growing medium moisture with a single device.
-
Measures the pH of the growing medium, with an optimal range between 6 and 7 to ensure proper nutrient absorption by the plants.
-
Measures soil moisture to control the watering level at each stage: between 70-80% during rooting and 65-75% during growth.
-
Light measurement function to verify that the plants receive adequate lighting in their position within the grow room.
-
Extremely simple to use: insert the probes into the growing medium and select the parameter to measure with a button, obtaining results in less than a minute.
-
Compatible with indoor and outdoor growing, it requires no batteries or calibration, making it ideal for home growers.
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
The pH, light and humidity are three key factors that you must control in your cultivation. The levels of these three elements must always be the most suitable for your plants. To carry a correct measurement, you need rapitest 3 in 1, a device with which you will easily measure these environmental factors. In just a few seconds, you will have at your disposal the most accurate information of any of the three values.
Full description
Features of the Rapitest 3 in 1
The Rapitest 3 in 1 is a ground parameter meter with which to better control the crop plants. Its 3-in-1 functions are: measure the pH of the substrate, measure the light that reaches the plants and measure soil moisture.
Why measure the pH and humidity of your substrate and soil?
Controlling pH is key for plants to do not suffer a nutritional block and can feed well. Plants have the optimal pH value between 6 and 7. However, in the growth phase it can be between 5.8 and 6.2 and in the flowering phase it can reach 7. If it is grown with a pH below 5 (very acidic), it can cause greater absorption of elements from the substrate and thus an excess of nutrients. But if the pH is too high, it would cause a slowdown in plant growth. On the other hand, It is very important to also measure the humidity level in each phase of cultivation. During rooting it should be between 70% and 80% and somewhat lower, around 65% and 75%, during the growth period.
How to use the Rapitest 3 in 1 ph and humidity meter?
The Rapitest 3 in 1 can be used both indoors and outdoors. You will only have to insert the meter probes into the ground and wait less than a minute to read the indicated value with the push of a button. The meter comes with 3 different scales (pH, light and humidity) which you can select to view the measured value.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
