SANlight Q and EVO Series Wiring – 37 cm Connection Cable and 2 Meter Extension
SANlight Q and EVO Series Wiring – 37 cm Connection Cable and 2 Meter Extension
-
Type: Chain power cable
-
37 cm connection: Q Series
-
2 m extension: Q Series Gen2 and EVO
-
Origin: Original SANlight part
-
Weights: 0.08 and 0.2 kg (estimated)
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🔌 Daisy-chain power supply: Multiple luminaires on a single outlet.
- 📏 37 cm or 2 m: Short cable between adjacent bars or long run.
- 💡 Q Series Gen2 and EVO: The 2 m extension works for both series.
- 🔧 Original parts: Exact connector and section from SANlight.
- ⚠️ Check the series: The 37 cm one is specific to the Q Series.
The cables that convert several SANlight into a single installation.
Full description
Original SANlight cables for connecting and daisy-chaining luminaires from the Q Gen2 and EVO series. With the integrated driver, SANlight luminaires are powered in series: one luminaire powers the next, and the whole set hangs from a single plug.
37 cm connection cable
Short lead for joining two luminaires mounted side by side. This is the cable for the Q Series, designed for adjacent bars where no length is needed.
2 m extension cable
For separating luminaires or bringing the power supply to a distant point. Compatible with Q Gen2 and EVO Series.
Technical data
- 37 cm connection: Q Series
- 2 m extension: Q Gen2 and EVO Series
- Function: daisy-chain power supply between luminaires
- Original SANlight parts
Check the exact series of your luminaire before ordering. Published weights are estimates.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Identify your series: Q, Q Gen2, or EVO.
2. Choose the 37 cm cable if the bars are placed next to each other.
3. Choose the 2 m extension if you need to separate them or move the power outlet further away.
4. Disconnect the network installation before wiring.
5. Daisy-chain the luminaires from the first to the last.
6. Close the unused outlets with the end cap and apply power.

SANlight Q and EVO Series Wiring – 37 cm Connection Cable and 2 Meter Extension
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Envío gratis antes
Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
There are two options: a 37 cm connection cable and a 2 metre extension cable. Both are genuine SANlight parts for connecting and daisy-chaining fixtures.
-
It is a short jumper for linking two fixtures mounted side by side. It belongs to the Q Series and is meant for adjacent bars, where no extra length is needed.
-
It lets you space fixtures further apart or run power to a more distant point. It is compatible with the Q Series Gen2 and with the EVO series.
-
Because the driver is built in, SANlight fixtures feed one another: one fixture powers the next and the whole set runs off a single socket. Less cabling and a far tidier installation.
-
Yes, they are genuine SANlight parts. Using the manufacturer's own cabling is the best way to guarantee a proper connection to your fixtures.
-
Check the exact series of your fixture before ordering. The 37 cm cable belongs to the Q Series and the 2 m extension to the Q Series Gen2 and EVO.