Aluminum Adhesive Tape – Hermetic Sealing for Indoor Exhaust Ducts and Tubes
Aluminum Adhesive Tape – Hermetic Sealing for Indoor Exhaust Ducts and Tubes
-
Material: Aluminio con brillo metal
-
Función: Sella fugas de aire en tubos
-
Resistencia: Aguanta cambios de temperatura
-
Uso: Ventilación, iluminación y filtros
Envío 24/72h
Seguro y sin sorpresas
Pago seguro SSL
Tu pago 100% seguro
Descubre las ventajas del PRO CLUB
Descuentos de hasta -12%, envíos prioritarios y más.
Devolución fácil en 15 días
Sin preguntas
Descripción
- 🔧 Efficient sealed: The aluminum adhesive tape with metal brightness is ideal for sealing air leaks in ventilation systems, guaranteeing effective insulation.
- 💡 Heat resistant: Perfect to set lighting systems near bulbs, its material resists high temperatures without detachment.
- 🛠️ Easy application: Simple to use, you just have to join the parts, apply the tape without wrinkles and press to ensure a firm and bubble seal.
- 🔒 Safe fixation: Once applied, it is difficult to take off, ensuring that unions and accessories are completely safe.

Descripción completa
What can you use metallic shine aluminum adhesive tape for?
Metal glitter foil adhesive tape can be used for seal air leaks found in ventilation systems. Likewise, it can be applied near light bulbs when fixing lighting systems. And, best of all, you won't have to worry about it coming off. Because the metal glitter foil adhesive tape was designed with a highly resistant material to temperature changes and more. So it will generate the result you expect so much. With this, you can join ventilation systems, fix lighting accessories, seal air leaks in tubes. And, in the same way, perform the connection from the filter to the tubes.
How do you use metal glitter aluminum foil tape?
The method of use is very simple, because first of all you must join the two parts that you want to join. And, immediately, apply the adhesive tape without leaving pockets or wrinkles. After that, it is essential to use pressure on the tape so that it is fixed correctly. However, not everything is so simple. Well then you must verify that there are no air bubbles, voids or spaces where air can escape or enter. Because these could be temperature leaks, odors and more. Subsequently, you will only have to see how the aluminum adhesive tape with metallic shine is extremely difficult to remove. So our parts, accessories and those unions will be totally safe.
Garantía
En GrowIndustry solo trabajamos con productos de calidad contrastada y marcas de confianza.
Cada artículo pasa por un control antes del envío para asegurar que lo recibes en perfectas condiciones y listo para usar.
Tu satisfacción es nuestra prioridad.

Aluminum Adhesive Tape – Hermetic Sealing for Indoor Exhaust Ducts and Tubes
Únete a nuestro club exclusivo para clientes habituales y empieza a disfrutar de precios inmejorables, atención VIP y servicios premium para tus cultivos.
Descuentos crecientes
Ahorra entre un -3% y un -12% extra
Entregas rápidas
Con envíos gratuitos y discretos
Garantía extendida
de hasta 3 años
Preguntas frecuentes
-
Se utiliza para sellar las fugas de aire de los sistemas de ventilación y para unir conductos. También es la opción habitual para realizar la unión entre el filtro y los tubos de extracción.
-
Sí, se puede aplicar cerca de las bombillas al fijar los sistemas de iluminación. Está fabricada con un material altamente resistente a los cambios de temperatura, así que no tienes que preocuparte de que se despegue.
-
Une primero las dos partes que quieras juntar y coloca la cinta de inmediato, sin que queden bolsas ni arrugas. Después ejerce presión sobre ella para que se fije bien.
-
Revisa que no queden burbujas de aire, huecos ni espacios por donde pueda entrar o salir aire. Esos puntos son los que acaban provocando fugas de temperatura y de olores en la instalación.
-
Al contrario: una vez bien aplicada resulta sumamente complicada de despegar. Precisamente por eso deja las piezas, accesorios y uniones aseguradas de forma duradera.
-
Encaja en todo el circuito de aire: unión de sistemas de ventilación, sellado de fugas en tubos y fijación de accesorios de iluminación. Es un consumible que conviene tener siempre a mano al montar un armario.