Blumat Drip Distributors – up to 5 irrigation points per sensor
Blumat Drip Distributors – up to 5 irrigation points per sensor
Pay in one tap with Bizum — no extra fees.
-
Working diameter: Ø3 mm tube
-
Points per sensor: up to 5
-
Formats: 10-unit blister pack, in-line and end-of-line
-
Blister pack: 8 in-line + 2 end-of-line + 2 Ø3 mm + 1 cap
-
First distributor: 8 cm from the sensor
-
Minimum tank height: 2 m
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 💧 Up to 5 points per sensor: they distribute the water from a single sensor to several points in the substrate.
- 🌱 For large pots: recommended for pots from 30-40 L, where a single outlet is insufficient.
- 🧩 Two pieces: intermediate distributor, which allows the tube to continue, and end-of-line, which closes the section.
- 🔧 Complete blister pack: 8 intermediate, 2 end-of-line, 2 m of Ø3 mm tubing and 1 cap.
- 🔌 No electricity: they work by capillary action, just like the rest of the Blumat system.
A single sensor, several evenly distributed watering points.
Full description
Blumat Drip Distributors – up to 5 watering points per sensor
Blumat drip distributors distribute the water coming from a single sensor to several points in the growing medium. They allow up to 5 drip points for each sensor, which is especially useful in large pots of more than 30-40 L, where a single outlet would only wet part of the root ball. They are mounted on the Ø3 mm tube that descends from the main line.
Key features
- Up to 5 drip points per sensor: they distribute the flow from a single sensor to several outlets.
- Designed for large pots: recommended for pots of 30-40 L or more, where the sensor's 20-25 cm range is insufficient.
- Two different pieces: the intermediate distributor allows the tube to continue to the next point, and the end-of-line piece closes the section.
- Complete blister pack: 8 intermediate distributors, 2 end-of-line pieces, 2 m of Ø3 mm tube, and 1 cap.
- No electricity: they operate by capillary action, like the rest of the Blumat system.
How to use
- First adjust the sensor and only then connect the distributors.
- Place the first distributor 8 cm from the sensor.
- Alternate the intermediate distributors along the Ø3 mm tube and close the section with an end-of-line distributor.
- Always mount the distributors on supports so that the roots do not invade them.
- Do not touch the black screw on the distributor.
- If you supply the installation from a tank, raise it to a minimum height of 2 m.
What is it compatible with?
Drip distributors always work on Ø3 mm tubing, which is the downpipe that runs from the main line to the Tropf-Blumat sensor. The Blumat system uses two proprietary diameters that are not interchangeable: the Ø8 mm is the main supply line (8 mm tees, elbows, fittings and valves, pressure reducer, tank connector) and the Ø3 mm is the downpipe to the sensor (mini-tees, mini-fittings, caps and these distributors). Do not try to mount a drip distributor directly on the Ø8 mm tube.
Technical specifications
- Brand: Blumat (Austria)
- Operating diameter: Ø3 mm tube
- Drip points per sensor: up to 5
- Formats: blister pack of 10 units, 1 intermediate distributor and 1 end-of-line piece
- Blister pack contents: 8 intermediate distributors + 2 end-of-line pieces + 2 m of Ø3 mm tube + 1 cap
- Minimum tank height: 2 m
- Distance from the first distributor to the sensor: 8 cm
- Operation: by capillary action, without electricity or a pump
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
