Digital Irrigation Programmer – Digital Controller to Automate Drip Irrigation in Crops

Features of the digital irrigation programmer

The digital irrigation programmer allows you to select from 15 irrigation combinations and gives you a maximum of 8 irrigations per day, with which you can supply water to 10 of your plants. This team battery operated. So it doesn't matter if you cultivation is indoor or outdoor, you can use this programmer to automate the watering of your plants. It is important that you buy good quality batteries to prevent them from running out quickly, since it is a device that consumes a lot of energy.

How to use the digital irrigation programmer?

Easy! What you need is place the direct digital programmer in a faucet socket that connects to the water network. With the help of a 16 mm tube, connect the output of the equipment, while placing a dropper per pot as appropriate. After having it installed, it will be ready to program it based on the intensity and time you require.

How to automatically program the digital irrigation programmer?

Thanks to its buttons and small screen it is easy to operate. The first thing you need is to press the "Time" button until you set it to hours to set the current time. Then you press the program button and when it appears "1 ON" You will indicate the exact moment you want the irrigation to start, specifying the days and time. While to select when to stop watering, press the program button again. When observing that the screen indicates '1 Off' you will be ready to select the days and times.

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

Installing and using this digital timer is very easy. You just need to connect it to a standard faucet, attach an irrigation hose to the outlet, and set the schedules using its digital display and intuitive buttons. Ideal for automating irrigation for up to 10 plants or more, without daily monitoring.

- Connect the timer to a ¾” faucet.

- Attach a 16 mm hose to the device's outlet and distribute the irrigation (e.g., one drip emitter per plant).

- Insert 2 good quality AA batteries to ensure longer autonomy.

- Press the "Time" button to set the current time.

- Press "Program" to define the irrigation cycles:
1. "1 ON" → Select start time and days.
2. "1 OFF" → Select end time and days.

- You can set up to 8 irrigation schedules per day, adjusting duration and frequency.

- Ideal for watering during low evaporation hours, such as at dawn or dusk.