Go directly to product information
1 of 2

EDM Bathroom Extractor Fan – Quiet 104 and 158 m³/h Fan with Optional Timer

EDM Bathroom Extractor Fan – Quiet 104 and 158 m³/h Fan with Optional Timer

Regular price 20,24 €
Black Friday price 18,95 € Reference price 20,24 €−6 %
Out of stock
Black Friday price available on 27/11 · Get early access with Pro Club or by subscribing
Pay in one tap with Bizum — no extra fees.
Is this product for you?
  • Airflow: 104 m³/h (Ø10 cm) or 158 m³/h (Ø12 cm)

  • Power: 15 W and 16 W depending on the model

  • Noise level: 40 dB and 46 dB

  • Dimensions: frame of 160.5 x 160.5 mm or 180 x 180 mm

  • Power supply: 230 V, 50 Hz

  • Finish: white, 2 cm frame

Diameter: Ø10 cm · 104 m³/h
Timer: No timer
Quantity

Description

  • 🌬️ Two flow rates: 104 m³/h (Ø10 cm) or 158 m³/h (Ø12 cm).
  • ⏲️ With or without a timer: continues extracting after the light is turned off.
  • 🔇 Quiet: 40 dB for the small and 46 dB for the large.
  • 🔋 Low energy consumption: only 15 and 16 W.
  • 🧱 2 cm frame: wall or ceiling mounting, white finish.

The simple solution when you don't need a duct fan.

Full description

EDM extractor fan: quiet ventilation for small spaces

Wall or ceiling extractor fan with low power consumption and low noise level, designed for bathrooms, storage rooms, closets, and small growing spaces where a duct extractor is not needed. Two diameters and versions with or without a timer.

Which one to choose

Ø10 cm — 104 m³/h and 40 dB

15 W, 160.5 x 160.5 mm frame with an 85 mm duct outlet at the rear. For small rooms, closets, and small drying areas.

Ø12 cm — 158 m³/h and 46 dB

16 W, 180 x 180 mm frame. 50% more airflow for very little difference in power consumption, for when the space or humidity load requires it.

With or without a timer

The with timer version continues to run for a few minutes after turning off the light or switch. This is what makes the difference against humidity and odors: the extractor finishes renewing the air when you are no longer there. The without timer version starts and stops with the switch, and it is the logical option if you are going to control it from an external controller or programmer.

Common to all four models

  • Power supply: 230 V, 50 Hz
  • Frame: 2 cm thick · Color: white
  • Mounting: wall or ceiling
  • Manufacturer: EDM

Recommended accessory: EDM non-return valve (ref. 08412) to prevent the return of air and odors when the extractor is stopped.

Warranty

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

How to use

1. Choose the diameter according to the volume of the room: Ø10 for small spaces and Ø12 if there is more humidity or space.
2. Drill the hole in the wall or ceiling and pass the exhaust pipe to the outside.
3. Fix the frame and connect it to 230 V, respecting phase and neutral.
4. In the version with a timer, also connect the light control wire.
5. Install a non-return valve if the duct is long or opens onto a patio.
6. Clean the grille and blades every few months to avoid losing airflow.

See details

Complete your grow room around this product

Tell us your space and we'll calculate the rest: light, extraction, filter, climate, pots and irrigation sized to your square meters, with this product already included.

Configure my room

Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.

Increasing discounts

Save an extra -3% to -12%

Free shipping before

From €39 for Bronze and no minimum for Platinum (up to 10 kg)

Fast deliveries

With free, discreet shipping

Extended warranty

Up to 3 years

I want to be PRO

Frequently asked questions