GrowMax Water Reverse Osmosis System + MaxQuarium Deionization – Water Purification up to 0

Reverse Osmosis System + Maxquarium Deionization 000 PPM – Growmax Water

The reverse osmosis system + Maxquarium de-ionization 000 PPM from Growmax Water is the definitive solution for growers who demand the purest water possible from the first moment. Designed to produce up to 500 liters daily (20 liters per hour) of ultra pure water, this system is ideal for hydroponics, aquaponics, aquariums and organic crops, where water quality is a critical factor.

Thanks to its advanced filtering and de-ionization technology, it eliminates up to 95% salts and heavy metals, and until 99% of chlorine, also reducing chloramines, sediments and chemical contaminants. The resulting water, with a level of 000ppm, allows total absorption of nutrients by plants, improving root development, metabolism and general crop production.

Key Benefits of the Maxquarium 000 PPM System

• Extreme filtration- Removes or reduces salts, nitrates, nitrites, heavy metals, chloramines, pesticides, herbicides, sediments, benzene, oils, detergents and more.

• High efficiency: optimized pure water / waste water ratio (approximately 2:1).

• Compatible with sensitive crops: ideal for organic systems where traces of salt or chlorine can harm microorganisms and roots.

• Simple installation: valid for indoors and outdoors, without the need for complex connections.

Operating conditions

• Maximum flow: 20 L/h – 500 L/day

• Ideal inlet pressure: 4 BAR

• Minimum/maximum pressure: 3 kg/cm² – 6 kg/cm²

• Recommended water temperature: 25ºC

• Recommended input TDS: up to 500 ppm

To maintain this performance, it is recommended to install a PowerGrow and Maxquarium Pressure Pump Kit, especially in areas where water pressure is low or unstable. It is also advisable to Safety Buoy Kit, which prevents spills by automatically controlling the filling.

Maintenance and spare parts

The filter elements must be replaced every 4,000 liters of produced water. For complete maintenance you require:

• 1x De-ionization filter

• 1x Pack of 10" replacement filters

• 1x High flow reverse osmosis membrane (500 L/day)

The Maxquarium 000 PPM System not only guarantees water completely free of impurities, but also becomes a key tool for those looking for total control over irrigation quality, maximizing the use of fertilizers and minimizing waste.

En GrowIndustry solo trabajamos con productos de calidad contrastada y marcas de confianza.

Cada artículo pasa por un control antes del envío para asegurar que lo recibes en perfectas condiciones y listo para usar.

Tu satisfacción es nuestra prioridad.

1. Comprueba que la presión de tu red está entre 3 y 6 kg; lo óptimo son 4 bar. Por debajo de 40 psi añade el kit de bomba de presión (ref 422113).
2. Coloca el equipo en vertical y bien sujeto, cerca de la toma de agua y de un desagüe.
3. Conecta la entrada a la red, la salida de agua purificada al depósito y el tubo de rechazo al desagüe.
4. Deja correr el agua 10-15 minutos antes del primer uso para enjuagar los filtros.
5. Mide la EC de salida con un medidor: debe marcar 0,0. Si empieza a subir, la resina está agotada.
6. Cambia el pack de filtros y la membrana cada 4.000 L y el filtro de desionización 10" (422109) cuando la EC deje de marcar 0,0.