HY Water Cooler – Chiller to Lower Water Temperature in Hydroponic Systems
HY Water Cooler – Chiller to Lower Water Temperature in Hydroponic Systems
-
Tipo: Chiller profesional para enfriar el agua de depósitos hidropónicos y aeropónicos
-
Modelos: HY 150 (150W), HY 500 (220W), HY 1000 (310W) y HY 2000 (435W)
-
Termostato: Digital con resolución de 0,1 °C y rango de ajuste entre 5 y 35 °C
-
Capacidad: Apto para depósitos de 150 a 2000 litros según modelo, conexión 16 mm
Envío 24/72h
Seguro y sin sorpresas
Pago seguro SSL
Tu pago 100% seguro
Descubre las ventajas del PRO CLUB
Descuentos de hasta -12%, envíos prioritarios y más.
Devolución fácil en 15 días
Sin preguntas
Descripción
This device fulfills the function of Cool water. The optimal temperature for this transport to nutrients and can be absorbed by the plant must range between 20 and 22 ° C. For this reason, if the water is very cold, it must be heated and, vice versa, if it is above 22 ° C it must be heated.
Descripción completa
HY Water Chiller — Chiller for Hydroponic and Aeroponic Systems
The HY water cooler is a professional chiller Made in Italy and designed specifically for hydroponic, aeroponic and aquaponic growing systems. It keeps the nutrient solution in the tank at the optimal temperature (between 18 and 22 °C) during the summer, preventing hot water from promoting root diseases such as pythium and improving oxygenation and nutrient absorption by the plant.
Why do you need an HY chiller in your crop?
When the water temperature rises above 22-24 °C, the amount of oxygen dissolved in the nutrient solution drastically decreases, the roots suffer thermal stress and the pythium proliferates. The HY chiller lowers the temperature in a precise and controlled manner to ensure a healthy root environment throughout the cycle.
Available models
- HY 150 (150W): for tanks up to 150 liters
- HY 500 (220W): for tanks up to 500 liters
- HY 1000 (310W): for tanks up to 1000 liters
- HY 2000 (435W): for tanks up to 2000 liters
Technical characteristics
- Precision digital thermostat with 0.1 °C resolution
- Temperature adjustment range: from 5°C to 35°C
- Titanium coaxial heat exchanger, resistant to corrosion by salts and fertilizers
- High efficiency compressor with low energy consumption and low noise level
- Connection for irrigation pipe 16mm
Recommended installation
- Place the chiller in a ventilated area, outside the grow tent if possible.
- Connect the water inlet to the tank with 16 mm pipe.
- Install a prefilter and one water pump with flow according to the chosen model.
- Set the thermostat to the desired temperature (recommended: 18-22°C).
Indicated for
Systems NFT, DWC, aeroponics, aquaponics and all hydroponic crops where thermal control of the nutrient solution is critical for performance.
Garantía
En GrowIndustry solo trabajamos con productos de calidad contrastada y marcas de confianza.
Cada artículo pasa por un control antes del envío para asegurar que lo recibes en perfectas condiciones y listo para usar.
Tu satisfacción es nuestra prioridad.
Cómo usar
