Innotech Proton SMD 420 W – 4-Bar LED Light with Samsung Diodes and 660 nm Red
Innotech Proton SMD 420 W – 4-Bar LED Light with Samsung Diodes and 660 nm Red
-
Power: 420 W with continuous 0-100% dimming
-
PPF: 1218 µmol/s with an efficiency of 2.9 µmol/J
-
Diodes: Samsung LM281B Plus 2835 and 660 nm red
-
Coverage: 1 x 1 m with a 120º angle
-
Dimensions: 79 x 78 cm and 3.96 kg
-
Lifespan: L90 over 50,000 hours
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 💡 1218 µmol/s at 420 W: efficiency of 2.9 µmol/J.
- 🔴 Samsung LM281B Plus + 660 nm red: orange and red-rich spectrum for bulking.
- ▫️ Four bars: much more uniform PPFD than a compact panel.
- 🔌 RJ14 port: daisy-chain several units and control them from a single one.
- 🎚️ 0-100% dimming: continuous, without fixed steps.
Full spectrum for the entire cycle in one square meter.
Full description
Innotech Proton SMD 420 W: full spectrum with 660 nm deep red
The Innotech Growlight Proton SMD 420 W is a high-performance four-bar LED light for indoor growing. It delivers 1218 µmol/s of PPF with 420 W, covers 1 x 1 m, and is designed to support the entire cycle, from rooting to the end of flowering.
What sets it apart
Samsung LM281B Plus diodes + 660 nm red
The mix of Samsung LM281B Plus 2835 with 660 nm deep red provides a spectrum rich in orange and red. That part of the spectrum is what drives bulking and final quality, and it is precisely where many lights that only pursue the efficiency figure fall short.
Four bars, not a panel
Distributing the 420 W across four separate bars provides a much more uniform PPFD distribution over the square meter than a compact panel of the same power, and reduces hot spots over the canopy.
RJ14 port for daisy-chaining
It includes an RJ14 port that allows connecting several units together and controlling them all from a single Proton SMD unit. It is the simple way to scale to several lights without wiring each one separately.
Note: this RJ14 port is for daisy-chaining Proton units together, not for connecting them to a third-party central control panel.
Continuous 0-100% dimming
You adjust the intensity continuously according to the growth phase, without fixed steps.
Technical specifications
- Power: 420 W · PPF: 1218 µmol/s · Efficiency: 2.9 µmol/J
- Diodes: Samsung LM281B Plus 2835 + 660 nm deep red
- Voltage: 185-265 V AC, 50/60 Hz
- Light distribution: 120º angle
- Dimming: 0-100 % · THD: < 10 %
- Connectivity: RJ14 port for daisy-chaining
- Mounting height: 30-60 cm above the tips
- Maximum ambient temperature: 30 ºC
- Lifespan: L90 > 50,000 hours
- Coverage: 1 x 1 m · Dimensions: 79 x 78 cm · Weight: 3.96 kg
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Hang the light centered over the one-square-meter grow area.
2. Keep it between 30 and 60 cm above the canopy depending on the stage.
3. During rooting and growth, run it at 40–60% power.
4. During flowering, gradually increase the power up to 100%.
5. If you have several units, daisy-chain them via the RJ14 port and control them from one.
6. Make sure the room temperature does not exceed 30°C to prevent reducing its lifespan.

Innotech Proton SMD 420 W – 4-Bar LED Light with Samsung Diodes and 660 nm Red
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
From 2% to 10% on every purchase depending on your level
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
Free discreet packaging as a PRO CLUB member
Extended warranty
Up to 90 days to return depending on your level
Frequently asked questions
-
It covers 1 x 1 m with a PPF of 1218 μmol/s and 420W of power, with an efficacy of 2.9 μmol/J. It's designed to accompany the whole cycle, from rooting to the end of flowering.
-
It combines Samsung LM281B Plus 2835 diodes with deep 660 nm red, giving a spectrum rich in orange and red. That part of the spectrum is what drives final bulking and quality, exactly where many fixtures chasing only the efficacy figure fall short.
-
Spreading the 420W across four separate bars gives a much more uniform PPFD distribution over the square metre than a compact panel of the same power. It also reduces hot spots over the plant canopy.
-
It lets you connect several Proton SMD units together and control them all from a single unit, an easy way to scale up without wiring each fixture separately. Keep in mind it's meant to chain Proton units together, not to connect them to a third-party central control panel.
-
Adjustment is continuous from 0 to 100%, with no fixed steps. This lets you set the intensity exactly to the grow stage at any given moment.
-
The recommended mounting height is 30 to 60 cm above the plant tops, with a maximum ambient temperature of 30 degrees. Its lifespan is L90 above 50,000 hours.