Neptune Hydroponics CO₂ Controller – Automatic CO₂ Regulator with Probe for Indoor Growing

Features of the Neptune Probe Co2 Controller

The Neptune Co2 Controller with Probe comes with a digital display which indicates at all times the amount of carbon dioxide you have. The precision of the controller is 40 ppm and its consumption is just 1.8W. It can operate at a temperature between 10 and 50 degrees Celsius. The Neptune probe cable measures 3.1 meters, the output cable to the CO2 valve measures 1 meter and the plug cable 60 centimeters.

How to use the Co2 controller with Neptune probe?

The Co2 controller is very easy to use. By clicking on Switch, you can choose between H and L. Option H is the maximum value you want for Co2 in the crop and option L is the lowest value. With the small buttons you can raise and lower these values. When the crop reaches the maximum CO2 level, its input is cut off. And when you reach the minimum level, the device will turn on again. If you hold down the Switch button for 10 seconds, you access an internal menu to choose the switch option. plug in a generator or extractors. To use CO2 well in plants, you have to increase it little by little during the flowering phase. That is why you absolutely need this Co2 controller with Neptune probe.

Why measure Co2 with the Neptune Probe Controller?

The Co2 controller with Neptune probe will allow you measure and control the amount of CO2 in the crop. The built-in probe is responsible for measuring the concentration of this gas. Depending on what the controller dials, it will open or close the bottle's electro valve or turn on the CO2 generator. The adequate amount of CO2 will make your plants finish the flowering phase sooner and much more productively. But this gas not only speeds up the process, but also will increase the weight of the fruits by creating more cell walls in the plant. 

At GrowIndustry we only work with products of proven quality and trusted brands.

Each item goes through a check before shipping to ensure you receive it in perfect conditions and ready to use.

Your satisfaction is our priority.

1. Conecta el sensor de CO2 al controlador y colócalo en el cultivo.
2. Instala la válvula solenoidea en la línea de CO2 de la bombona.
3. Conecta la válvula al controlador Neptune.
4. Programa el nivel de CO2 deseado (recomendado: 1000-1500 ppm).
5. El controlador abrirá y cerrará la válvula automáticamente.
6. Calibra el sensor periódicamente para mantener la precisión de medición.