SANlight Q Gen2 Series End Cap – Cap for Free Distributor Ports
SANlight Q Gen2 Series End Cap – Cap for Free Distributor Ports
-
Type: Closing piece / intake cap
-
Compatible: SANlight Q-Series Gen2
-
Use: H distribution block or luminaire
-
Function: Live contact protection
-
Weight: 0.02 kg (estimated)
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🔌 Covers open outlets: From the H-shaped distribution block or the light fixture.
- 💧 Against moisture: Protects the contact in high humidity environments.
- 🔧 Q-Series Gen2: Specific part for that series.
- ⚡ Prevents failures: An open contact is a weak point in the installation.
- 💡 Original SANlight: Exact fit in the proprietary connector.
Cheap, small, and necessary: close the outlets you don't use.
Full description
Original closing piece from SANlight for covering unused sockets in the H distributor block or in the fixture itself. It is a small but necessary cap: it protects the contact from dust, moisture, and accidental contact.
When you need it
If you assemble an H block with more outputs than you are going to use, or if your fixture has a free daisy-chain socket, that socket must be closed. In a grow room the humidity is high and an open contact is a point of failure.
Compatibility
Specific to Q-Series Gen2.
Technical data
- Type: closing piece / socket cap
- Compatibility: SANlight Q-Series Gen2
- Function: protect free sockets on the distributor or fixture
The published weight is an estimate.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Count the outlets on your distributor or light fixture that will remain unused.
2. Order one blanking plate for each unused outlet.
3. Disconnect the installation from the power supply before working on it.
4. Check that the contact is clean and dry.
5. Snap the blanking plate into place until it is secure.
6. Apply tension and check that no outlets remain open.

SANlight Q Gen2 Series End Cap – Cap for Free Distributor Ports
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Envío gratis antes
Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
It is a cap that covers any sockets left unused, either on the H-shaped distribution block or on the fixture itself. It protects the contact from dust, moisture and accidental touch.
-
Whenever you fit an H block with more outputs than you are going to use, or when your fixture has a free daisy-chain socket. That socket must be closed off, no exceptions.
-
It is specific to SANlight's Q-Series Gen2. Make sure your equipment belongs to that series before adding it to your order.
-
Because humidity in a grow room is high and an open contact becomes a point of failure. It is a small part, but a necessary one if you want to work with peace of mind.
-
Yes. It works both on the free outputs of the distribution block and on any daisy-chain sockets left unused on the fixture.
-
Yes, it is the brand's original end cap. Because it comes from the manufacturer itself, it fits perfectly and does its protective job with no play.