SANlight H Distribution Block – Power Distributor for Q Gen2 and EVO Series
SANlight H Distribution Block – Power Distributor for Q Gen2 and EVO Series
-
Type: Power distribution block
-
Shape: H-shaped, one input and multiple outputs
-
Compatible: Q Series Gen2 and EVO
-
Origin: Genuine SANlight part
-
Weight: 0.15 kg (estimated)
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🔌 Single outlet: Distributes power to multiple luminaires.
- 💡 Q Gen2 and EVO Series: SANlight proprietary connector.
- 🔧 No power strips: Avoid putting power strips inside the cabinet.
- 📏 Compact: A single piece for all distribution.
- ⚡ Free outlets: Covered with the SANlight closing piece.
The piece that organizes the wiring of a multi-bar SANlight installation.
Full description
The H-distribution block from SANlight distributes mains power among several luminaires, so that the whole setup hangs from a single plug. Its H shape gives the part its name: one input and several distributed outputs.
What it is for
In a setup of three or four bars, wiring each one to its own outlet forces you to put power strips inside the cabinet. The H-block solves the distribution in a single compact piece, designed for SANlight’s proprietary connector.
Compatibility
Compatible with Q Series Gen2 and EVO series. Any free sockets are covered with SANlight’s closing piece.
Technical data
- Type: power distribution block
- Compatibility: Q Series Gen2 and EVO
- Function: several luminaires on a single plug
- Original SANlight part
The published weight is an estimate.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Check that your luminaires are Q Series Gen2 or EVO.
2. Count how many bars you are going to power from the block.
3. Disconnect the installation from the mains before wiring.
4. Connect the block input to the mains outlet.
5. Wire each luminaire to an output on the block.
6. Cover the empty outputs with the blanking piece and tighten.

SANlight H Distribution Block – Power Distributor for Q Gen2 and EVO Series
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Envío gratis antes
Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
It splits the mains supply between several luminaires, so the whole set hangs off a single socket. It is the part that organises the power distribution of your SANlight installation.
-
Because of its shape: one inlet and several outlets spread out to draw an H. It is a compact part that solves in a single element what would otherwise take several connections.
-
It is compatible with SANlight's Q Series Gen2 and EVO series, and is designed for the brand's proprietary connector. Check your series before ordering.
-
Any sockets you do not use are covered with the SANlight blanking piece. It is important not to leave them open, so the contact stays protected.
-
In a setup with three or four bars, wiring each one to its own socket means putting power strips inside the tent. The H block handles that distribution in a single compact part, without taking up space or adding clutter.
-
Yes, it is an original SANlight part, designed specifically for their connector system. With it you are sure of a perfect fit in your installation.