Smart Controller - Cli-Mate

Smart Controller - Cli-Mate

The Smart Controller by Cli-Mate is a ventilation controller with automatic temperature control, designed to set the extractor fan's minimum speed and adjust the ventilation proportionally according to the temperature of the growing area. Thanks to its hysteresis system, it prevents sudden speed jumps that wear out motors and generate unnecessary noise. It is the ideal option for growers looking for a balance between ease of use and advanced climate control.

Benefits

• Proportional and progressive ventilation. Smoothly adjusts the extractor fan speed according to the temperature, without sudden jumps.
• Less noise and wear. The hysteresis system prevents constant motor switching on and off.
• Energy savings. The extractor fan operates at minimum speed when additional ventilation is not needed.
• Simple setup. Only two rotary knobs for desired temperature and minimum speed.
• Suitable for humid environments. Its IP44 protection makes it reliable in indoor growing rooms.

Key Features

• Minimum extractor fan speed control via potentiometer.
• Thermostat to set the system's reference temperature.
• Proportional ventilation speed adjustment based on temperature.
• Temperature probe with a 5-meter cable for placement wherever needed.
• IP44 protection suitable for humid growing environments.

Technical Specifications

• Power supply: 220-240V / 50Hz
• Maximum current: 6.5A
• Temperature range: 10-40 ºC
• Protection: IP44
• Weight: 0.5 kg
• Includes: 5 m temperature probe

How to Use

• Installation. Install the controller in an accessible area near the extractor fan.
• Connection. Connect the extractor fan to the device's output and place the probe at the point to be monitored.
• Temperature adjustment. Set the desired temperature using the corresponding knob.
• Minimum speed adjustment. Set the base speed for continuous ventilation.
• Validation. Check that the speed increases progressively as the temperature rises.
• Maintenance. Periodically check the probe and connections to ensure stable operation.

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

1. Connect the Smart Controller to the mains and the extractor fan to the unit.
2. Install the temperature probe at the point where you want to measure the ambient temperature.
3. Turn the control knob to set the desired temperature.
4. Adjust the second control knob to set the minimum fan speed.
5. The unit will gradually increase the fan speed as the temperature rises, reaching maximum speed at +3°C above the set value.