Go directly to product information
1 of 1

Treegers Extension Wand – Extender for the Quantum PAR Meter

Treegers Extension Wand – Extender for the Quantum PAR Meter

Regular price 9,13 €
Black Friday price 7,80 € Reference price 9,13 €−14 %
Out of stock
Black Friday price available on 27/11 · Get early access with Pro Club or by joining the early access list
Pay in one tap with Bizum — no extra fees.
Is this product for you?
  • Type: Extension wand for PAR sensor

  • Compatible with: Quantum Treegers PAR meter

  • Function: Reach distant points

  • Advantage: Avoids the operator's shadow

  • Weight: 0.3 kg (estimated)

Quantity

Description

  • 📐 Reach further: Measure in corners and at the back of cabinets.
  • 📊 No shadow: Avoid the most common mistake when measuring PAR.
  • 🌿 Don't step on the crop: There's no need to get between the plants.
  • 🔧 Original accessory: For the Treegers Quantum PAR meter.
  • ⚠️ It's not a meter: Requires the Quantum PAR meter.

Measure where it really matters: at the edges of the crop.
Full description

Extension wand for the Treegers Quantum PAR meter. It holds the sensor at the end of a pole, so that PPFD can be measured in places that are out of reach.

What it is for

With the wand you can reach the corners of a grow table, the back of a cabinet, or the area under a dense canopy without putting your body into the crop. This avoids two problems: stepping on or breaking plants and, above all, casting a shadow over the sensor, which is the most common mistake when measuring PAR and the one that most distorts the reading.

Technical data

  • Type: PAR sensor extension wand
  • Compatibility: Treegers Quantum PAR meter
  • Function: reach distant points without casting a shadow

Accessory: it is not a meter; it requires the Quantum PAR meter. The published weight is an estimate.

Warranty

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

How to use

1. Attach the PAR meter sensor to the end of the stick.
2. Turn on the light fixture and let it stabilize for a few minutes.
3. Hold the stick from outside the crop, with your arm extended.
4. Keep the sensor horizontal at canopy height.
5. Take readings in the center and at the four corners.
6. Record the values and adjust the height or dimming according to the target.

See details

Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.

Increasing discounts

Save an extra -3% to -12%

Envío gratis antes

Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)

Fast deliveries

With free, discreet shipping

Extended warranty

Up to 3 years

I want to be PRO

Frequently asked questions