Go directly to product information
1 of 1

Treegers T-Dimmer 0-10V – Manual Intensity Dimmer with 3 m Cable

Treegers T-Dimmer 0-10V – Manual Intensity Dimmer with 3 m Cable

Regular price 13,69 €
Black Friday price 11,95 € Reference price 13,69 €−12 %
Out of stock
Black Friday price available on 27/11 · Get early access with Pro Club or by subscribing
Pay in one tap with Bizum — no extra fees.
Is this product for you?
  • Type: Manual intensity regulator

  • Signal: 0-10 V

  • Cable: 3 m

  • Steps: 0-10-20...100 %

  • Compatible: Luminaires with 0-10 V input

  • Weight: 0.25 kg (estimated)

Quantity

Description

  • 🎚️ Manual adjustment: In 10% increments, with no app or setup required.
  • 🔌 0–10 V signal: Suitable for any light fixture with that input.
  • 📏 3 m cable: Keeps the controller outside the cabinet.
  • 💡 For 1 or 2 light fixtures: The simple option compared to a controller.
  • ⚠️ No scheduling: Use the Growcast for cycles and ramps.

Hassle-free dimming: just turn it and you're done.
Full description

The T-Dimmer by Treegers is a manual dimmer with a 0-10 V output and a 3-meter cable. It adjusts in fixed steps: 0, 10, 20, 30... up to 100%.

The simple alternative to the controller

If you only have one or two luminaires and do not need to program cycles or ramps, the T-Dimmer solves dimming without an app, without pairing, and without setup: you turn it and read the percentage. The 3 m cable lets you keep the control outside the cabinet and adjust without entering the grow area.

Fixed steps, not continuous

The adjustment goes up by ten percent at a time. It is enough for everyday use, but if you need fine adjustment or time scheduling, the option is the Growcast controller.

Technical data

  • Type: manual dimmer
  • Signal: 0-10 V
  • Cable: 3 m
  • Steps: 0-10-20-30...100%
  • Compatibility: luminaires with 0-10 V input

The published weight is an estimate.

Warranty

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

How to use

1. Check that your light has a 0-10 V dimming input.
2. Disconnect the light from the mains before wiring.
3. Connect the T-Dimmer to the light's dimming port.
4. Run the 3 m cable to the outside of the cabinet.
5. Turn on the power and set the controller to the desired percentage.
6. Lower the light level during the growth stage and increase it to 100% during full bloom.

See details

Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.

Increasing discounts

Save an extra -3% to -12%

Free shipping before

From €39 for Bronze and no minimum for Platinum (up to 10 kg)

Fast deliveries

With free, discreet shipping

Extended warranty

Up to 3 years

I want to be PRO

Frequently asked questions