VDL Climatron Pro pH Probe – Replacement pH 0-14 Probe for pH/EC Monitor

VDL Climatron Pro pH Probe – Replacement pH 0–14 Probe for pH/EC Monitor

Replacement pH probe for the VDL Climatron Pro pH/EC Monitor (ref. 600493), with a measurement range of 0 to 14 pH and an accuracy of ±0.1. It is exactly the same probe that comes standard with the monitor. pH probes are consumables: the glass electrode degrades with use and over time, so that readings lose stability and accuracy even if calibration is performed correctly. Therefore, it is advisable to replace them periodically and always have a spare.

Key Features

• Full 0–14 pH range: covers the entire acid-base spectrum, beyond the usual working range in cultivation.
• Accuracy of ±0.1 pH: sufficient resolution to safely adjust the nutrient solution.
• Original system probe: it is the same one that comes standard with the Climatron Pro pH/EC Monitor, not a generic equivalent.
• Periodic replacement consumable: designed to replace the worn probe and restore the monitor's correct readings.
• Maintenance without replacing the equipment: you regain the monitor's reliability by changing only the probe.

Technical Specifications

• Parameter: pH
• Measurement range: 0–14 pH
• Accuracy: ±0.1 pH
• Use: replacement pH probe for the VDL Climatron Pro pH/EC Monitor
• Weight: 0.286 kg
• Reference: 600494

What's Included

• 1 × replacement pH probe

Compatibility

This probe is the replacement for the VDL Climatron Pro pH/EC Monitor (ref. 600493), which already includes it as standard: if you have just purchased the monitor, you do not need this reference. Buy it when the original probe has degraded, stops calibrating properly, or gives unstable readings. The pH/EC monitor, in turn, is the accessory that brings the EC and pH of the nutrient solution to the screen of the VDL Climatron Pro controller (ref. 600492). For conductivity measurement, the corresponding replacement is the EC electrode (ref. 600495).

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

1. Disconnect the VDL Climatron Pro pH/EC Monitor from the power supply before changing the probe.
2. Remove the old pH probe from the reservoir and disconnect its connector from the monitor.
3. Remove the protective cap from the new probe and rinse it with clean water; do not rub it or touch the glass bulb.
4. Connect the new probe to the monitor and reconnect the equipment to the power supply.
5. Calibrate the probe with the calibration solutions following the monitor menu before accepting it.
6. Place the probe in the nutrient solution reservoir, check the reading, and always keep the bulb moist when the equipment is idle.