Vents SRF 900 Silencer – 900 mm Flexible Silencer for Ø100 to Ø250 Ducts
Vents SRF 900 Silencer – 900 mm Flexible Silencer for Ø100 to Ø250 Ducts
-
Length: 900 mm for all four diameters
-
Diameters: 100, 150, 200 and 250 mm
-
Body: Flexible, double-layer aluminium
-
Filling: Fire-resistant insulation
-
Series: Vents SRF
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🔇 900 mm long: 50% more absorbent section than the standard 600 mm format.
- 📏 Four diameters: Ø100, Ø150, Ø200 and Ø250 mm to fit your extractor fan.
- 🌬️ Double-layer aluminium: Flexible body that adapts to the ductwork layout.
- 🔥 Fireproof insulation: Absorbent filling between the two layers of aluminium.
- 🔌 Easy installation: Inserted into the duct and secured with metal clamps.
The 900 mm Vents SRF silencer for when the 600 mm format has fallen short.
Full description
SRF 900 Silencer Vents
Flexible duct silencer with a length of 900 mm, available in Ø100, Ø150, Ø200 and Ø250 mm. It is installed between the extractor fan and the air outlet to reduce installation noise without replacing the fan.
900 mm versus 600 mm
The noise reduction of a silencer depends directly on the length of the absorbent section through which the air passes. These SRF models measure 900 mm, 50% longer than the standard 600 mm format, so that the air spends more time in contact with the insulation material. This is the ideal option when 600 mm is insufficient or when the grow room is located in a residential building with neighbours.
Construction
- Length: 900 mm for all four diameters.
- Body: flexible, double-layer aluminium.
- Filling: fire-resistant insulation between the two layers.
- Diameters: 100, 150, 200 and 250 mm.
Where to install it
- At the extractor fan outlet, where motor and turbulence noise originate.
- Before the external air outlet, to prevent noise from escaping through the duct.
- In highly demanding installations, at both points.
Accessories
It is fitted with metal flanges over the duct and connects to the extractor fans in the catalogue of the same diameter. If you also want to distribute the air within the room, check it alongside the DWL2 duct diffusers.
Note: the manufacturer does not publish the noise reduction in dB or the weight of these silencers.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Choose a silencer with the same diameter as your extractor fan and ductwork.
2. Cut the extraction duct at the point where you want to install it.
3. Install the silencer at the extractor fan outlet, where the noise originates.
4. Secure both ends to the ductwork using metal clamps.
5. If noise still escapes outdoors, add a second silencer before the exhaust vent.
6. Avoid tight bends near the silencer to prevent airflow loss.

Vents SRF 900 Silencer – 900 mm Flexible Silencer for Ø100 to Ø250 Ducts
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
Attenuation depends directly on the length of the absorbent section the air passes through. These SRF units measure 900 mm, 50 percent more than the usual 600 mm format, so the air spends more time in contact with the insulating material. It's the option for when the 600 mm one wasn't enough.
-
It's manufactured in Ø100, Ø150, Ø200 and Ø250 mm, all of them 900 mm long. You just need to choose the diameter that matches your installation's ducting. It fits the fans in the catalogue that share the same diameter.
-
At the fan outlet, where motor and turbulence noise originates, and also before the outdoor exhaust outlet so noise doesn't escape through the duct. For very demanding setups you can fit one at each point. It's inserted between the fan and the air outlet without changing the fan itself.
-
The body is flexible, made of a double layer of aluminium with a fireproof insulating filling between the two layers. That construction is what absorbs noise along the 900 mm length. Being flexible, it adapts well to runs with bends.
-
It's mounted with metal clamps onto the duct, so installation is straightforward. If you also want to distribute the air inside the room, you can pair it with the DWL2 duct diffusers. With that you have the extraction section fully covered.
-
The manufacturer doesn't publish the dB attenuation or the weight of these silencers, so we'd rather not give a figure. What we do know is that its greater length increases the contact between the air and the insulation compared to a 600 mm model. That's why it's the recommended choice when the grow is in a home with neighbours.