Water Master 3-4mm Pressure Core Remover
Water Master 3-4mm Pressure Core Remover
-
Diameter: 3-4 mm (interchangeable tips)
Type: Manual push-type hole punch
Recommended use: Perforating microtubing and drip irrigation tubing
Approximate weight: 0.001 kg
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🔁 Two tips: Interchangeable 3 and 4 mm tips in a single tool.
- ✂️ Burr-free cut: Leaves the hole clean for a tight fit of the dripper.
- ⚡ In one motion: The push-button mechanism pierces the pipe without additional effort.
- 🎒 Compact format: Lightweight tool, easy to carry and store between jobs.
The Water Master 3-4mm push-button hole punch covers all dripper diameters with a single tool.
Full description
Water Master 3-4mm Pressure Hole Punch
The Water Master 3-4mm Pressure Hole Punch is a versatile and precise tool for punching clean holes in irrigation pipes and microtubes. It features two interchangeable 3 and 4 mm tips, allowing it to be adapted to different dripper diameters without the need to buy two separate tools. Its pressure mechanism makes the cut in a single motion, leaving a clean hole without burrs that guarantees a tight fit of the dripper or connector. Designed for comfortable and durable use, it is a must-have in any installation or maintenance of drip irrigation systems.
Benefits
- Dual diameter in a single tool. Interchangeable 3 and 4 mm tips for different irrigation components.
- Clean punching. The pressure cut leaves burr-free holes, improving the tightness of the dripper.
- Fast installation. A single motion to punch the pipe, without additional effort.
- Durable tool. Resistant materials designed for frequent use in installation and maintenance.
- Comfortable use. Ergonomic design that facilitates handling even during long installation sessions.
Key features
- Two interchangeable tips of 3 and 4 mm diameter.
- Pressure punching mechanism, in a single motion.
- Clean cut, without burrs, for a tight fit of the dripper.
- Suitable for drip irrigation pipes and microtubes.
- Compact tool, easy to transport and store.
Technical specifications
- Diameter: 3-4 mm (interchangeable tips)
- Type: Manual pressure hole punch
- Recommended use: Punching of microtube and drip irrigation pipe
- Brand: Water Master
- Approximate weight: 0.001 kg
How to use
- Choose the right tip. Select the 3 or 4 mm tip depending on the diameter of the dripper or connector you are going to install.
- Mark the punching point. Place the tool on the point of the pipe where you want to place the dripper.
- Press firmly. Squeeze the hole punch until the tip goes through the pipe wall.
- Remove the tool. Carefully remove the hole punch, checking that the hole is clean.
- Insert the dripper or connector. Insert the irrigation component into the newly created hole.
- Check the tightness. Turn on the irrigation and verify that there are no leaks around the punched point.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Choose the 3 or 4 mm tip depending on the diameter of the emitter or connector.
2. Position the tool on the pipe at the point where the emitter will be installed.
3. Press firmly until the tip pierces the pipe wall.
4. Remove the tool, checking that the hole is clean.
5. Insert the emitter or connector into the newly created hole.
6. Check for leaks by turning on the water and verifying that there are no leaks.

Water Master 3-4mm Pressure Core Remover
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
Save an extra -3% to -12%
Envío gratis antes
Desde 39 € en Bronze y sin mínimo en Platinum (hasta 10 kg)
Fast deliveries
With free, discreet shipping
Extended warranty
Up to 3 years
Frequently asked questions
-
Es una herramienta versátil y precisa para perforar agujeros limpios en tuberías y microtubos de riego. Incorpora dos puntas intercambiables de 3 y 4 mm, por lo que cubre distintos diámetros de gotero sin necesidad de comprar dos herramientas.
-
Elige la punta de 3 o 4 mm según el gotero o conector que vayas a instalar, sitúa la herramienta en el punto de la tubería y presiona firmemente hasta que la punta atraviese la pared. Después inserta el componente de riego en el orificio y comprueba que no hay fugas.
-
Un agujero limpio y sin rebabas garantiza un ajuste hermético del gotero o conector, mejorando la estanqueidad del punto de riego. El mecanismo a presión realiza el corte de un solo gesto, dejando el orificio perfecto para el montaje.
-
Depende del diámetro del gotero o conector que vayas a instalar en la tubería. Con las dos puntas intercambiables puedes adaptarte a distintos componentes de riego con una sola herramienta.
-
Sí, está fabricado con materiales resistentes pensados para uso frecuente en instalación y mantenimiento de sistemas de riego por goteo. Su diseño ergonómico facilita el manejo incluso en sesiones largas, y es compacto y fácil de transportar.
-
Con stock, el pedido sale el mismo día laborable si lo haces antes de las 14:00 y llega de 1 a 3 días laborables después; en la ficha verás la fecha de entrega estimada. Además cuentas con devolución fácil en 30 días y pago seguro con tarjeta, Bizum, PayPal, Klarna o ViaBill.