Water Master 3mm Pressure Core Remover
Water Master 3mm Pressure Core Remover
-
Diameter: 3 mm
Type: Manual push-type punch
Recommended use: Perforating micro-tubing and drip irrigation pipes, planting seedlings
Approximate weight: 0.001 kg
Discover the benefits of the PRO CLUB
Discounts of up to -12%, priority shipping and more.
Easy returns within 15 days
No questions asked
Description
- 🎯 3 mm holes: Clean, consistent-diameter holes in pipe and microtube.
- ⚡ One-step operation: The press-fit mechanism makes the cut in a single movement.
- 🤲 Ergonomic design: Reduces effort in installations with many irrigation points.
- 💪 Durable materials: Designed for heavy-duty use in gardens, orchards, or greenhouses.
The Water Master 3 mm press-fit hole punch ensures a watertight fit for every emitter.
Full description
Water Master 3mm Pressure Hole Punch
The Water Master 3mm Pressure Hole Punch makes it easy to create precise, uniform holes in irrigation pipes and micro-tubing for installing drippers and connectors. Made from durable materials, its ergonomic design allows for comfortable and effective use, saving time and effort with every installation. The pressure mechanism cuts the hole in a single motion, leaving a clean 3 mm opening that ensures a watertight fit for the irrigation component. It is an essential tool for gardeners and drip irrigation professionals seeking efficiency and uniformity at every point in the installation.
Benefits
- Precise punching. Clean, uniform 3 mm holes with every use.
- Saves time. Cuts in a single motion, with no additional tools required.
- Ergonomic use. Comfortable design that reduces effort when installing multiple irrigation points.
- Durable materials. Designed for heavy-duty use in gardens, orchards, or greenhouses.
- Uniform results. Holes of a consistent diameter make it easy to fit the dripper securely.
Key features
- 3 mm punching diameter.
- One-motion pressure punching mechanism.
- Ergonomic design for comfortable handling.
- Suitable for drip irrigation pipes and micro-tubing.
- Compact and durable tool.
Technical specifications
- Diameter: 3 mm
- Type: Manual pressure hole punch
- Recommended use: Punching holes in drip irrigation micro-tubing and pipes, transplanting seedlings
- Brand: Water Master
- Approximate weight: 0.001 kg
How to use
- Position the tool. Place the hole punch at the exact point on the pipe where the dripper will be installed.
- Press firmly. Push down until the tip pierces the pipe wall.
- Remove the tool. Pull out the hole punch and check that the hole is clean and uniform.
- Insert the dripper or connector. Insert the irrigation component into the newly created hole.
- Check for leaks. Turn on the irrigation and check that there are no leaks at the punched point.
- Repeat at each point. Always use the same technique to maintain uniformity throughout the installation.
Warranty
At GrowIndustry we only work with proven quality products and trusted brands.
Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.
Your satisfaction is our priority.
How to use
1. Position the tool at the exact point on the pipe where the emitter will be placed.
2. Press firmly until the tip pierces the pipe wall.
3. Remove the tool, checking that the hole is clean and uniform.
4. Insert the emitter or connector into the newly created hole.
5. Check for leaks by turning on the water and verifying that there are no leaks.
6. Repeat the same technique at each point to maintain uniformity.

Water Master 3mm Pressure Core Remover
Join our exclusive club for regular customers and start enjoying unbeatable prices, VIP service and premium support for your grows.
Increasing discounts
From 2% to 10% on every purchase depending on your level
Free shipping before
From €39 for Bronze and no minimum for Platinum (up to 10 kg)
Fast deliveries
Free discreet packaging as a PRO CLUB member
Extended warranty
Up to 90 days to return depending on your level
Frequently asked questions
-
Facilita la creación de agujeros precisos y uniformes de 3 mm en tuberías y microtubos de riego, para instalar goteros y conectores. El corte se realiza en un solo movimiento y deja un orificio limpio que asegura un ajuste hermético.
-
Coloca el sacabocados en el punto exacto de la tubería donde irá el gotero y presiona firmemente hasta que la punta atraviese la pared. Retira la herramienta, inserta el gotero o conector en el orificio y abre el riego para comprobar que no hay fugas.
-
Un diámetro constante de 3 mm facilita un ajuste hermético del gotero en cada punto de la instalación. Si usas la misma técnica en cada perforación, mantienes la uniformidad en todo el sistema de riego.
-
Es un imprescindible para jardineros y profesionales del riego por goteo que buscan eficiencia y uniformidad. Su diseño ergonómico reduce el esfuerzo en instalaciones con múltiples puntos de riego, en jardín, huerto o invernadero.
-
Sí, además de la perforación de microtubo y tubería de riego por goteo, su uso recomendado incluye la siembra de plántulas. Es una herramienta compacta y duradera pensada para un uso intensivo.
-
Sí, tienes devolución fácil en 30 días. Con stock, el pedido sale el mismo día laborable si lo haces antes de las 14:00 y llega de 1 a 3 días laborables después; en la ficha verás la fecha de entrega estimada. Además, puedes pagar con tarjeta, Bizum, PayPal o fraccionado con Klarna o ViaBill.