Water Master White Polyethylene Pipe

Water Master White Polyethylene Pipe

The Water Master White Polyethylene Pipe is the ideal addition to drip, sprinkler, and micro-irrigation systems. Made from high-density polyethylene, it stands out for its strength, durability, and flexibility, allowing it to adapt to any irrigation setup. Its reflective white color reduces the heating of the water inside, protecting root health. Available in 100-meter rolls in two diameters, Ø16 mm and Ø25 mm, it is suitable for both home installations and professional horticultural projects in greenhouses or outdoors.

Benefits

• More efficient irrigation. Distributes water evenly, optimizing the use of water resources.
• Easy installation. Its flexibility makes it easy to adapt to any irrigation layout.
• UV resistant. Treated to withstand prolonged sun exposure without degrading.
• Protects roots. The reflective white color reduces the heating of the water inside.
• Versatile. Suitable for drip, sprinkler, and micro-irrigation indoors and outdoors.

Key features

• Made from high-density polyethylene.
• Available in Ø16 mm and Ø25 mm.
• 100-meter rolls.
• Reflective white color to prevent overheating.
• UV resistance for outdoor use.
• Suitable for professional and home horticulture, greenhouses, and open fields.

Technical specifications

• Available diameters: 16 mm and 25 mm
• Length: 100 m per roll
• Material: high-density polyethylene
• Color: reflective white
• Weight (Ø16mm): 2.5 kg
• Weight (Ø25mm): 5 kg
• Brand: Water Master

How to use

• Choose the diameter. Select Ø16 mm or Ø25 mm depending on the flow rate and number of emitters in your installation.
• Map out the route. Unroll the pipe following the design of your irrigation system.
• Drill the irrigation points. Use a hole punch to create the holes where the emitters or micro-tubes will go.
• Install the fittings. Place emitters, connectors, or stakes in the drilled holes.
• Connect to the main system. Join the pipe to the water source or the irrigation timer.
• Check the system. Check for leaks and adjust the pressure before putting it into regular operation.

At GrowIndustry we only work with proven quality products and trusted brands.

Every item goes through a check before shipping to make sure it arrives in perfect condition and ready to use.

Your satisfaction is our priority.

1. Select Ø16 mm or Ø25 mm depending on the flow rate and number of drippers in your system.
2. Unroll the pipe following the design of your irrigation system.
3. Punch the irrigation points with a hole punch where the drippers or micro-tubes will go.
4. Install drippers, connectors, or stakes in the punched points.
5. Connect the pipe to the water source or to the irrigation timer.
6. Check the system, inspect for leaks, and adjust the pressure before putting it into regular operation.